1221
|
Ultimate Audio Playback / XXHighEnd Support / Re: 2.09 stops suddenly
|
on: December 21, 2017, 03:25:28 pm
|
Juan, you are right :
Audio Pc: Processor i7 970: 3200MHz (reduced to 1668MHz), 6+6 cores/ RAM Corsair DDR3, 24Gb, 1333MHz/ Mb Asus X58 Sabertooth/ OS and XXHE in Peterīs RAM-Disk / The CPU fan is the only one in the Audio Pc: NF-S12A (600rpm/6.7db)/ No graphic card/ Power supply: Seasonic SS-400FL2, fanless. Configuration and Updates in HOW IīVE BUILT MY NEW PC... http://www.phasure.com/index.php?topic=1673.0XXHighEnd: 2.09. Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN/ KS:Phasure NOS1 Out 4.0/ #4 Engine/ Adaptive Mode/ Q1=30 Q3=1, Q4=1, Q5=1, xQ1=40/ Dev.Buffer: 4096/ ClockRes: 15ms/ Straight Contiguous/ SFS: 8,00 (max 120)/ Not Invert/ Phase Alignment Off/ Allow format change/ Decode HDCD/ Playerprio: Low/ ThreadPrio: Real Time/ Scheme: Core 3-5/ UnAttended/ Not Switch during Playback Off/ Playback Drive none/ UnAttended/ Include Garbage Collect/ Copy to XX Drive by standard/ Always clear Proxy before Playback/ Stop Desktop Services/ Stop Remaining Services/ Stop All Services: Off/ Keep LAN Services: On - Persist: Off/ Use Remote Desktop/ Minimize OS/ XTweaks : Balanced Load 43/ Nervous Rate 100/ Cool when Idle -/ Provide Stable Power 0/ Utilize Cores always 1/ Time Performance Index: Optimal / Time Stability: Stable / Custom Filter: 705600 Low. Music Server PC (W10) totally silent with OS (W10) in SSD and music inside in SSDs - RDC > Ethernet Gigabyte cable 3m > Audio Pc > 1m USB Lush cable directly from the USB3.0 in the motherboard > PHASURE NOS1a-75B-G3 (Driver v1.0.4) 8ms > Blaxius BNC interconnects > Genelec 1037B 3-Way Active speakers with BNC inputs
Too long. This is from Google cache. Peter
|
|
|
1222
|
Ultimate Audio Playback / Your thoughts about the Sound Quality / Re: 2.09 sound quality
|
on: December 21, 2017, 03:23:19 pm
|
Hi, I changed my SFS back to 10.20 fairly soon after the second day with 9.00 which made me think the sound was "ugly". I recall that I had moments of thinking the same on the first day of using 9.00. It depends on the music. After a week of being back on 10.20 I still like it. About the SFS = 9.0 : well, I just finally set it to that because 8.0 did not satisfy me and 10.x is too much of it (highs). I quite explicitly decided that the "too much of it" counts for a few albums which I then will accept, *if* it already isn't about moisture, temperature, draft, ears or mood. IOW, the past week has been fine throughout. Peter
|
|
|
1223
|
Ultimate Audio Playback / XXHighEnd Support / Re: 2.09 stops suddenly
|
on: December 21, 2017, 03:12:42 pm
|
Hi Juan,
Here is your old signature :
XXHighEnd v2.09, 24GB memory, 12 cores (6+6), Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 40 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 8.98 (max 120) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off / Running Time Off / Minimize OS / XTweaks : Balanced Load = 43 / Nervous Rate = 100 / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering Low for 705600 / Always Clear Proxy before Playbck = On -> USB3 from MoBo -> Lush USB 1m -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4 (16ms) -> B'ASS Current Amplifier -> Blaxius Interlink -> Genelec 1037B 3-Way Active Speaker
But I don't think it is different anywhere ?
Regards, Peter
Edit : But this was grabbed at December 19, around 10pm (your time). Maybe you already re-entered it and we grabbed that version you already re-entered ?
|
|
|
1225
|
Ultimate Audio Playback / XXHighEnd Support / Re: Volume Setting not saved from RAM Disk
|
on: December 21, 2017, 01:25:47 pm
|
I should add :
It is quite crucial for me to know whether it is the Volume only or "everything" (like Q1 and SFS to name two others) because either is a very different situation to look for.
I'd actually say that if this is the Volume only, this always has been so.
N.b.: It is difficult to test in practice these days, as I work from RAM as a whole (for the OS) and installing a RAM Disk on top of that is not a funny thing to do.
|
|
|
1227
|
Ultimate Audio Playback / XXHighEnd Support / Re: Volume Setting not saved from RAM Disk
|
on: December 21, 2017, 10:47:01 am
|
Hi Colin,
The last time you came up with this, it was some kind of pilot error. Should be in the forum somewhere. And I did not change anything ...
One thing : I think it is so that when you use XXHighEnd to reboot (rightclick on Stop) the settings from that very moment are not saved. I recall I said similar the last time (maybe 3 months ago).
?
Regards, Peter
|
|
|
1230
|
Ultimate Audio Playback / Chatter and forum related stuff / Do not post anything until ... SOLVED
|
on: December 20, 2017, 08:46:18 am
|
... until this message has been removed. Chances are fair that you lose the post.
Sorry for the inconvenience. Peter
Edit : For the time being, when posting and prior to pressing Save, I would select all text and copy it, so when it is lost you still have the text for later. But please make mention of it, of course. So according to me it is solved now.
Regards, Peter
|
|
|
|