Title: 0.9z-7-3 Sample Rate not set Post by: arvind on September 13, 2012, 03:15:16 pm Hi Peter,
When I click play I get a message "Sample rate not set". Music plays as usual but I don't know how to get rid of this msg. Best regards, Arvind Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 13, 2012, 03:45:56 pm Huh ?
Arvind, Does this still happen when you kill XXEngine3.exe from memory (click blue led at the right) ? And otherwise, do you have a screenshot of that message for me ? Thanks, Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 13, 2012, 06:53:33 pm Huh ? Arvind, Does this still happen when you kill XXEngine3.exe from memory (click blue led at the right) ? And otherwise, do you have a screenshot of that message for me ? Thanks, Peter Peter blue led at the right??? Where can i find that? That message Arvind talks about pups up here also so now and than. :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: praphan on September 13, 2012, 07:02:59 pm Peter blue led at the right??? Where can i find that? Hi Gerard, Me too. I cannot find the blue led. Alternatively, please go to the drop down box where you can find and tune Q and Q factor. To the right, there is a box with the word "OFF" inside. Click that OFF button will kill Engine 3. I hope I have the right understanding. Regards, Praphan Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 13, 2012, 07:28:11 pm See mouse pointer for that blue led ...
Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 13, 2012, 07:35:03 pm See mouse pointer for that blue led ... Peter, I am really sorry.. :( Where??? Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 13, 2012, 09:53:26 pm Peter blue led at the right??? Where can i find that? Hi Gerard, Me too. I cannot find the blue led. Alternatively, please go to the drop down box where you can find and tune Q and Q factor. To the right, there is a box with the word "OFF" inside. Click that OFF button will kill Engine 3. I hope I have the right understanding. Regards, Praphan Hi Praphan, Thanx. I know that one. :) But that Blue led :wacko: :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 14, 2012, 07:50:07 am Quote Where??? Ehm, haha, well, yea ... Gerard, do you have the scaling in the OS at 100% ? Title: Re: 0.9z-7-3 Sample Rate not set Post by: arvind on September 14, 2012, 08:08:05 am Hi Peter,
Ok its like this. When I start the PC, Load playlist & click start I get the msg (attached). If I stop & click play again then the msg does not come back. So it comes at the first play only. It doesnt matter if engine #3 is killed or running. In both case the msg appears at the first play. Hope this helps. Best regards, Arvind Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 14, 2012, 08:18:23 am Ah. Thank you very much Arvind. That is useful information.
Not that I understand how it happens ... Btw, this is a typicle NOS1 message. When you think of this in advance at a next reboot, you might first start the Phasure Driver Control Panel and look at the set Sample Rate in there. Maybe it is helpful to me if you tell me what you see. You should see the same I as do here, but still something must be different. May you encounter that when you first start that Control Panel and now all is okay suddenly, then I also like to know that. Regards and thanks, Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 14, 2012, 10:05:01 am Quote Where??? Ehm, haha, well, yea ... Gerard, do you have the scaling in the OS at 100% ? Peter, I have it 100% and i tried 125% also. That are the only settings i can choose. But both give no blue led no matter what. :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 14, 2012, 10:10:36 am Hi Peter, Ok its like this. When I start the PC, Load playlist & click start I get the msg (attached). If I stop & click play again then the msg does not come back. So it comes at the first play only. It doesnt matter if engine #3 is killed or running. In both case the msg appears at the first play. Hope this helps. Best regards, Arvind I see you have it when you start XX. I have it sometime's in the in the middle of a cd. when a new track starts to play. :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 14, 2012, 12:53:28 pm Gerard - Is that with 0.9z-7-3 ?
Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 14, 2012, 12:55:43 pm Quote But both give no blue led no matter what. Then it must be about the Scaling in XXHighEnd somehow. So, I see you have *that* at 1.00 (or close to that). I guess I must look into that one ... Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 14, 2012, 01:53:06 pm Gerard - Is that with 0.9z-7-3 ? mmmmm Almost certain that it does. Not much playtime at the moment but i will look for you. :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: arvind on September 14, 2012, 02:58:08 pm H Peter,
The sampling rate in the phasure control panel is 352800 KHz (at computer start) & continues to be the same after clicking play in XXHE. Best regards, Arvind Title: Re: 0.9z-7-3 Sample Rate not set Post by: arvind on September 15, 2012, 04:10:12 pm Hi Peter,
This problem started with 0.9z-7-3 but now if I use 7-2 it gives the same message. Best regards, Arvind Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 15, 2012, 06:00:55 pm Arvind,
It looks to be dependend on timing issues; Today I (hopefully) solved something similar I could copy for "Format Change". This not yet, because I can't mimic it ... Thanks for letting me know, Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 16, 2012, 10:38:44 am Arvind,
What if you uninstall the Phasue NOS driver and reinstall it ? I have the hunch something is not right in there since I myself am unable to mimic the behaviour. Also, while I thought it was a timing issue, I just saw that there's an attempt lasting 1.5 seconds in there already which really should be enough. Regards, Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: arvind on September 16, 2012, 11:18:31 am Hi Peter,
Uninstalled the NOS 1 driver & reinstalled it but I still get the msg "Failed to set sample rate". Best regards, Arvind Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 16, 2012, 12:06:38 pm Ok, thanks.
Any other strangenesses maybe you encounter lately ? Maybe especially regarding the NOS1 ? Did you change anything regarding the OS ? (just asking, because I actually see no relation there) And what about setting the SFS to eg. 60 ... does that help for this maybe ? Sorry for your troubles; I just don't get it ... (but see your remark "it now happens to 0.9z-7-2 just the same") Regards, Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: arvind on September 16, 2012, 12:39:32 pm Hi Peter,
It seems that the root cause of both the problems were due to "Start Playback during Conversion" being activated (i guess accidentely/unknowingly). Now having deactivated it everything is solved. Sorry for the trouble. Gerard maybe you need to look at this too. Hope this solution works for you too. Best regards, Arvind Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 16, 2012, 01:01:25 pm Aha !
So maybe *I* look into that, right ? :) Glad it is solved Arvind ! Peter PS: But I still wonder whether this low SFS is related ... Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 24, 2012, 02:20:06 pm Peter,
Peter here is one i have. I see now it is a hdcd. :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 24, 2012, 03:41:08 pm Gerard, totally :offtopic: ...
You can't persist in saying that you don't use the scaling of the OS ... (that is for this other topic, but here is the proof of it). Regards, Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 24, 2012, 04:13:37 pm Gerard, totally :offtopic: ... You can't persist in saying that you don't use the scaling of the OS ... (that is for this other topic, but here is the proof of it). Regards, Peter :wacko: Did i say that??? Sorry for now i do not know what you mean. :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 24, 2012, 04:23:01 pm :offtopic:
If you mean about that blue button. This is what i have. When i change it to 100% that blue button is not there either. :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 24, 2012, 04:43:11 pm Gerard,
(this belongs in that other topic now; do you know which one it is ?) So what ? does this justify that you tell me that you "for sure" this setting is at 100% ? I don't get it ... Quote that blue button is not there either. Of course it is. See below. But it is not (in either setting) just after Rescaling - as more is not right - right after that (this is in the Release Notes). No matter what, I don't see the point in telling things differently from how they are; or do you think that will help you ? :no: :) Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 24, 2012, 04:53:00 pm Gerard, (this belongs in that other topic now; do you know which one it is ?) So what ? does this justify that you tell me that you "for sure" this setting is at 100% ? I don't get it ... Quote that blue button is not there either. Of course it is. See below. But it is not (in either setting) just after Rescaling - as more is not right - right after that (this is in the Release Notes). No matter what, I don't see the point in telling things differently from how they are; or do you think that will help you ? :no: :) Peter Peter, I am really sorry i do not understand one word you are saying. Let it be for now. Sorry :( Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 24, 2012, 05:45:30 pm Well, the important part is :
You set your OS scaling to 125% which is not compatible with XXHighEnd's scaling. This is why you have the anomalies (like that vertical bar right trhough everything). This is why I told (in that other topic - where I would like to move these posts to if I knew where to be) that you should set the OS to 100% and XXHighEnd to 125% (1.25) if you want that size. Then all works fine. But additionally, right after using the Scale functionality (or apply a Preset for that matter) the screen is not correct (like the MinOS button lacking). So, quit XX and restart it to get that right again. Besides, when you use the Scaling of XXHighEnd a bit larger than 100% (1.00) those lacking "numbers" will be there (like in the Preset buttons in the left). Now, if you can find that other topic for me ... Kind regards, Peter Title: Re: 0.9z-7-3 Sample Rate not set Post by: Gerard on September 24, 2012, 06:45:57 pm Well, the important part is : You set your OS scaling to 125% which is not compatible with XXHighEnd's scaling. This is why you have the anomalies (like that vertical bar right trhough everything). This is why I told (in that other topic - where I would like to move these posts to if I knew where to be) that you should set the OS to 100% and XXHighEnd to 125% (1.25) if you want that size. Then all works fine. But additionally, right after using the Scale functionality (or apply a Preset for that matter) the screen is not correct (like the MinOS button lacking). So, quit XX and restart it to get that right again. Besides, when you use the Scaling of XXHighEnd a bit larger than 100% (1.00) those lacking "numbers" will be there (like in the Preset buttons in the left). Now, if you can find that other topic for me ... Kind regards, Peter Ok yes i understand this. I have been playing around lately to see what works the best for me. But this is clear. I will set it to 100% Whas it this one? http://www.phasure.com/index.php?topic=2257.0 Thanx :) Title: Re: 0.9z-7-3 Sample Rate not set Post by: praphan on September 24, 2012, 07:06:08 pm This is why I told (in that other topic - where I would like to move these posts to if I knew where to ................ Now, if you can find that other topic for me ... Are you looking for this topic? http://www.phasure.com/index.php?topic=2170.0 Regards, Praphan Title: Re: 0.9z-7-3 Sample Rate not set Post by: PeterSt on September 25, 2012, 09:14:53 am LOL. It's both. But Praphan, your is this very topic ... haha.
Ok, I'll let it stay in here. |