31
|
Ultimate Audio Playback / XXHighEnd Support / Re: Core appointment lock to 100% CPU
|
on: January 12, 2014, 07:58:11 pm
|
And now I still don't know whether the behaviour is different in MinOS. Is this question so difficult ? I never used MinOS in my life, but if I have to I'll try it! First I'll try SFS 12. Too late, the graphs are all empty! Restart te music: 100/100/80/80% and then all go to 0% and that's history. CPU for XXHE in resource monitor says 50% and in task manager 72%. Something is definitively broken!
|
|
|
32
|
Ultimate Audio Playback / XXHighEnd Support / Re: Core appointment lock to 100% CPU
|
on: January 12, 2014, 05:58:08 pm
|
For the last description I used core 1-2 and unattended in normal OS. Maybe I should never have tried 3-5 appointment because there are only 4 cores? Setting Q3,4,5 to 0 gives 100% for core 4 and 0% for core 1,2 and 3. After the end of the song killing the Engine sets Core 4 back to 0% but 1,2 and 3 go up to about 30%. And now restarting but still waiting... (15 min.) Time for some hard action!
|
|
|
33
|
Ultimate Audio Playback / XXHighEnd Support / Re: Core appointment lock to 100% CPU
|
on: January 12, 2014, 04:41:46 pm
|
Yes, I guess XXHE is doing something in this direction. Playing a song again gives 100% cpu for 2 and 3 and 1 and 4 are back to zero. If it's not the cause then at least the solution (partly that is). Hope you find out more! (I just see 1 and 2 mirroring and 3 and 4 mirroring,like 1 going up 10% and 2 going down 10% at the same time)
|
|
|
34
|
Ultimate Audio Playback / XXHighEnd Support / Re: Core appointment lock to 100% CPU
|
on: January 12, 2014, 04:09:12 pm
|
OOOOh, this is complicated!
I restarted and CPU was at 2%. Very nice. I started XXHE and played one song. CPU1 fluctuating between 75 and 100%, CPU2 fluctuating between 0 and 25%, totaling (1,2,3,4) 25%. (CPU 3 and 4 at 0%)
But than... about halfway the 4 minute song Core 3 starts to go up. all the way to 100 %, then a little lower but core 4 takes over the difference. After the song core 1,2,3 are about 0 % but core 4 stays at 100%. Mainly service host processes.
I'll try a restart again... Ok after restart back to 1% total. I hope you can make sense out of this? Now after a few minutes rest I look again and total CPU around 30%. Core 1,2 and 3 working constantly, maybe nothing to do with XXHE?
|
|
|
35
|
Ultimate Audio Playback / XXHighEnd Support / Re: Core appointment lock to 100% CPU
|
on: January 12, 2014, 03:26:01 pm
|
Haha, it's difficult to explain. I see svshost take the most but total maybe around 10 to 30 percent. When I play XXHE core 2,3 and 4 go to 100% in the graphic, core 1 about 25%. Core 1 and 2 are mirroring like there are some spikes for 1 to go to 100% for some seconds and then core 2 goes to about 25%. In the list XXHE takes about 55% of the total, the rest is unexplained. After the music stops core 1 and 2 go to less then 10% but 3 and 4 are wildly going up and down from 0 to 100% averaging about 50% and the system total stays around 30%. All this is now with appointment 1-3. I see Service Host Local Sytem and Remote Procedure and Local security Authority Proces (and Resource manager) taking most.
Maybe 30% at rest is normal for Win8.1? But why all on core 3 and 4 and 1 and 2 sleeping? (Now and then I see 'parked' at some of the cpu's)
|
|
|
37
|
Ultimate Audio Playback / XXHighEnd Support / Re: Core appointment lock to 100% CPU
|
on: January 12, 2014, 12:23:12 pm
|
Hi Peter,
Yes, that's what I think. In the resource manager I checked the performance because the tv-program was not behaving like it should and I saw two cores constantly at 100% cpu. After that I started XXHE (for the first time after starting the PC) and changed core appointment to 'No appointment' and started the music. Now the two cores first went directly to zero % and quickly after all 4 cores went up to 100%. Music played perfectly...
Maybe the solution is to play some music with Q5 <> 1 before ending XXHE. BTW, after playing the music CPU went lower on 2 cores, and I stopped XXHE3 with the blue led to the right and this made the cores go up to 100% again. Maybe for AMD 4-core things go different from Intel? Today I will try some more...
|
|
|
38
|
Ultimate Audio Playback / XXHighEnd Support / Core appointment lock to 100% CPU
|
on: January 11, 2014, 11:01:40 pm
|
Hi Peter,
Just found out why my tvviewer doesnot decode the satelitechannels properly on my htpc. 2 cores are at constant 100% CPU. And I did not even use XXHE after I turned on the PC. So I started XXHE to see what happens. Core appointmant was 3-5 (?) and when I changed it to 'no appointment' I saw the CPU on core 0 and 1 go to zero and after the music started to play all 4 cores went up to 100% CPU and stayed there. Is there a way to get my CPU back to normal?
|
|
|
39
|
Ultimate Audio Playback / XXHighEnd Support / Re: Red Letters
|
on: January 01, 2014, 11:47:10 pm
|
The red letters only show up for me at the second song from a playlist since the wallpaper still shows the previous played song. Luckily i remembered this from the previous version!
Sounds very very good, only stops after a while, have to experiment for that a little more.
|
|
|
40
|
Ultimate Audio Playback / Playback Tweaks and Source related subjects / Re: Windows 8.1
|
on: October 20, 2013, 02:04:23 pm
|
Juan, Your description is right, but like Alain said you need to use the emailaccount initially. Looks like they want to make competition to Google/Android. I did not try to get my old account back but I hope it's not too much work..... This morning my videocard made everything look double, no gain no pain...
|
|
|
|