XXHighEnd - The Ultra HighEnd Audio Player
March 29, 2024, 04:18:03 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: August 6, 2017 : Phasure Webshop open ! Go to the Shop
Search current board structure only !!  
   Home   Help Search Login Register  
Pages: 1 [2]  All
  Print  
Author Topic: will not play hi-rez files  (Read 26383 times)
0 Members and 0 Guests are viewing this topic.
leifchristensen
Audio Loudspeaker
*
Offline Offline

Posts: 137

only the simplest can accommodate the most complex


View Profile Email
« Reply #15 on: June 05, 2009, 11:45:01 pm »

true,but like a friend of mine, Gary Dews of Borderpatrol, says: if it sounds right,it probably is Cool
we´ll figure it out , eventually!
good night
best
Leif
Logged

ASUS P5K-E/Intelquad6600/8gbkingston6400ram/SUPERTALENT ULTRA SSD 64GB systemdisk+4x500wdmusicdiscs/vista ultimate64bit/XXplayer ver.0.9z-2/AP QUAD q4(15/15/0/0)/player priolow/threadpriorealtime+4x,John Kenny modified/batterypowered clocks HiFace,  Twisted Pear Buffalo II reference dac and Avantgarde Trio custom  active basstowers (4xBD-15channel)powered by dual BD-30 amps,eq´ed by Rod Elliot P-84 and passively crossed over@130hZ with custom 24db/oct. passive line lvlv filter by Phil Marchand  and diy cost no object 6c45-IT-300Bamps(Borderpatrol based)+ a SOLID phono setup
pedal
Audio Enthusiast
**
Offline Offline

Posts: 402

XXHighEnd is THE best buy in Hi-Fi. Thank U Peter!


View Profile
« Reply #16 on: June 06, 2009, 12:00:02 am »

BTW: The music files are downloaded/purchased from Blue Coast Records, a 24/96 sampler album with GREAT, GREAT sound. A mix of small scale blues with very good performers in the tradition of Muddy Waters/Folk Singer. The best SQ I have heard from this kind of music. Highly recomended!

The rest of the story, Leif will tell himself. (It's a story with a happy ending).
Logged

Hardware: Stealth Mach III > Lush^2 > 24/768 Phasure NOS1a/G3  > active preamp > 3-way active XO > amps > ribbon/dynamic true line source speakers.

Settings all settings as recommended by Peter by October 2019.
leifchristensen
Audio Loudspeaker
*
Offline Offline

Posts: 137

only the simplest can accommodate the most complex


View Profile Email
« Reply #17 on: June 06, 2009, 12:06:36 am »

what are you doing on the web? shouldn´t you be B/&%&)& your wife by now Wink
best
Leif"past 50" Christensen
Logged

ASUS P5K-E/Intelquad6600/8gbkingston6400ram/SUPERTALENT ULTRA SSD 64GB systemdisk+4x500wdmusicdiscs/vista ultimate64bit/XXplayer ver.0.9z-2/AP QUAD q4(15/15/0/0)/player priolow/threadpriorealtime+4x,John Kenny modified/batterypowered clocks HiFace,  Twisted Pear Buffalo II reference dac and Avantgarde Trio custom  active basstowers (4xBD-15channel)powered by dual BD-30 amps,eq´ed by Rod Elliot P-84 and passively crossed over@130hZ with custom 24db/oct. passive line lvlv filter by Phil Marchand  and diy cost no object 6c45-IT-300Bamps(Borderpatrol based)+ a SOLID phono setup
pedal
Audio Enthusiast
**
Offline Offline

Posts: 402

XXHighEnd is THE best buy in Hi-Fi. Thank U Peter!


View Profile
« Reply #18 on: June 06, 2009, 12:24:39 am »

what are you doing on the web? shouldn´t you be B/&%&)& your wife by now Wink
best
Leif"past 50" Christensen

Hmmm. It's a hard choice between hi-rez and sex, but on second thoughts.......... Good night! love
Logged

Hardware: Stealth Mach III > Lush^2 > 24/768 Phasure NOS1a/G3  > active preamp > 3-way active XO > amps > ribbon/dynamic true line source speakers.

Settings all settings as recommended by Peter by October 2019.
leifchristensen
Audio Loudspeaker
*
Offline Offline

Posts: 137

only the simplest can accommodate the most complex


View Profile Email
« Reply #19 on: June 06, 2009, 12:41:44 am »

traitor! Shocked
Logged

ASUS P5K-E/Intelquad6600/8gbkingston6400ram/SUPERTALENT ULTRA SSD 64GB systemdisk+4x500wdmusicdiscs/vista ultimate64bit/XXplayer ver.0.9z-2/AP QUAD q4(15/15/0/0)/player priolow/threadpriorealtime+4x,John Kenny modified/batterypowered clocks HiFace,  Twisted Pear Buffalo II reference dac and Avantgarde Trio custom  active basstowers (4xBD-15channel)powered by dual BD-30 amps,eq´ed by Rod Elliot P-84 and passively crossed over@130hZ with custom 24db/oct. passive line lvlv filter by Phil Marchand  and diy cost no object 6c45-IT-300Bamps(Borderpatrol based)+ a SOLID phono setup
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #20 on: June 06, 2009, 08:21:54 am »

BTW: The music files are downloaded/purchased from Blue Coast Records, a 24/96 sampler album with GREAT, GREAT sound. A mix of small scale blues with very good performers in the tradition of Muddy Waters/Folk Singer. The best SQ I have heard from this kind of music. Highly recomended!

Ah, I wanted those myself anyway. Production "within 24 hours", so no time to compress. Haha.
I will get them and let you know.
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
leifchristensen
Audio Loudspeaker
*
Offline Offline

Posts: 137

only the simplest can accommodate the most complex


View Profile Email
« Reply #21 on: June 06, 2009, 03:59:41 pm »

they sound good,but AHHHHH soooo boring music,as often is the case with these audiophile releases
I couldn´t keep awake, so I´m back to redbook Louis Armstrong @Duke´s place Happy
who cares what format it is....it don´t mean a thing if it ain´t got that swing
playing on the spdif output via 10m cables from basement musicserver to Buffalo 9008 and all is well    very happy
imo
Best
Leif
Logged

ASUS P5K-E/Intelquad6600/8gbkingston6400ram/SUPERTALENT ULTRA SSD 64GB systemdisk+4x500wdmusicdiscs/vista ultimate64bit/XXplayer ver.0.9z-2/AP QUAD q4(15/15/0/0)/player priolow/threadpriorealtime+4x,John Kenny modified/batterypowered clocks HiFace,  Twisted Pear Buffalo II reference dac and Avantgarde Trio custom  active basstowers (4xBD-15channel)powered by dual BD-30 amps,eq´ed by Rod Elliot P-84 and passively crossed over@130hZ with custom 24db/oct. passive line lvlv filter by Phil Marchand  and diy cost no object 6c45-IT-300Bamps(Borderpatrol based)+ a SOLID phono setup
pedal
Audio Enthusiast
**
Offline Offline

Posts: 402

XXHighEnd is THE best buy in Hi-Fi. Thank U Peter!


View Profile
« Reply #22 on: June 07, 2009, 12:49:54 am »

they sound good,but AHHHHH soooo boring music,as often is the case with these audiophile releases
I disagree! It is true that "audiophile releases" with unknown artists often sounds boring, but this album is great musicianship. IF you happen to like simple rural blues. But, ok, let's be honest, I wouldn't spend $40 for this 12 track album, if it wasn't because of the 24/96 SQ   sounds good !
I truly enjoyed this album, and will play it again, from time to time.
Logged

Hardware: Stealth Mach III > Lush^2 > 24/768 Phasure NOS1a/G3  > active preamp > 3-way active XO > amps > ribbon/dynamic true line source speakers.

Settings all settings as recommended by Peter by October 2019.
leifchristensen
Audio Loudspeaker
*
Offline Offline

Posts: 137

only the simplest can accommodate the most complex


View Profile Email
« Reply #23 on: June 07, 2009, 12:55:36 am »

good musicians but their repotoire is downright boring
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

if I had to listing to only this kind of music I would rather change my hobby to knitting!
IMO
best
Leif
Logged

ASUS P5K-E/Intelquad6600/8gbkingston6400ram/SUPERTALENT ULTRA SSD 64GB systemdisk+4x500wdmusicdiscs/vista ultimate64bit/XXplayer ver.0.9z-2/AP QUAD q4(15/15/0/0)/player priolow/threadpriorealtime+4x,John Kenny modified/batterypowered clocks HiFace,  Twisted Pear Buffalo II reference dac and Avantgarde Trio custom  active basstowers (4xBD-15channel)powered by dual BD-30 amps,eq´ed by Rod Elliot P-84 and passively crossed over@130hZ with custom 24db/oct. passive line lvlv filter by Phil Marchand  and diy cost no object 6c45-IT-300Bamps(Borderpatrol based)+ a SOLID phono setup
komsansr
Audio Loudspeaker
*
Offline Offline

Posts: 1


View Profile Email
« Reply #24 on: July 12, 2009, 06:51:55 am »

Hi
At 1st .. I never posted in any forum .. sorry if i made some wrong

My system
OS : Window 7
Sound card on board : Realtek HD Audio Device .. ALC833.. specification
               HD Audio Headphone : out 2X44.1-192kHz, 24bit
               HD Audio Speaker     : out 8X44.1-192kHz, 24bit
               HD Audio SPDIF        : out 2X44.1-192kHz, 32bit
Playback Device from Control Panel : ..from advance tab..Max avialable bit and sample rate is 24bit@192kHz all

Audio File : wav format both 16bit@44.1kHz and 24bit@96kHZ
Audio Player : Foobar 2000 with WASAPI

               From system above, I could play all audio file I have

               With XXHighEnd, I could play all 16bit@44.1 file with #3 engine .. but couldnt for 24bit@96kHz file

               I tried to activate DAC test then. and for
                           Output : Speaker
                           Engine : #3
                           mode   : DAC test

               Result
               Start Audio Device Analysis Exclusive Mode support Speakers (High Definition Audio Device)      

     Supported : 2|16|44100|176400|4
Not supported : 2|24|44100|264600|6
Not supported : 2|32|44100|352800|8
     Supported : 2|16|48000|192000|4
Not supported : 2|24|48000|288000|6
Not supported : 2|32|48000|384000|8
Not supported : 2|16|88200|352800|4
Not supported : 2|24|88200|529200|6
Not supported : 2|32|88200|705600|8
    Supported : 2|16|96000|384000|4
Not supported : 2|24|96000|576000|6
Not supported : 2|32|96000|768000|8
Not supported : 2|16|176400|705600|4
Not supported : 2|24|176400|1058400|6
Not supported : 2|32|176400|1411200|8
    Supported : 2|16|192000|768000|4
Not supported : 2|24|192000|1152000|6
Not supported : 2|32|192000|1536000|8
Not supported : 2|16|352800|1411200|4
Not supported : 2|24|352800|2116800|6
Not supported : 2|32|352800|2822400|8
Not supported : 2|16|384000|1536000|4
Not supported : 2|24|384000|2304000|6
Not supported : 2|32|384000|3072000|8

              this may mean that i cant play my 24bit@96kHz file with this sound card.

              I tried to test again with DAC test share mode ... and I set  bit and sample rate at 24bit@192kHz in playback device Exclusive Mode (with 16bit@44.1kHz file)

              Result
              Start Audio Device Analysis Shared Mode support Speakers (High Definition Audio Device)      

    Supported : 2|16|44100|176400|4
    Supported : 2|24|44100|264600|6
    Supported : 2|32|44100|352800|8
    Supported : 2|16|48000|192000|4
    Supported : 2|24|48000|288000|6
    Supported : 2|32|48000|384000|8
    Supported : 2|16|88200|352800|4
    Supported : 2|24|88200|529200|6
    Supported : 2|32|88200|705600|8
    Supported : 2|16|96000|384000|4
    Supported : 2|24|96000|576000|6
    Supported : 2|32|96000|768000|8
    Supported : 2|16|176400|705600|4
    Supported : 2|24|176400|1058400|6
    Supported : 2|32|176400|1411200|8
    Supported : 2|16|192000|768000|4
Not supported : 2|24|192000|1152000|6
Not supported : 2|32|192000|1536000|8
    Supported : 2|16|352800|1411200|4
    Supported : 2|24|352800|2116800|6
    Supported : 2|32|352800|2822400|8
    Supported : 2|16|384000|1536000|4
    Supported : 2|24|384000|2304000|6
    Supported : 2|32|384000|3072000|8

                   I tried to play my 24bit@96kHz then at dac is 24bit 96kHz.. the file edit from 16bit@44.1kHz by Wavelab 5..
                   error : Endpoint Create Failed > The DAC does not accept this byte sequence
                   error : 2/32/96000/768000/8
                   error : Device cannot play
                   error : engine #3 did not start within the expected time

                   I tried to test again with DAC test share mode at 24bit@96kHz in playback device Exclusive Mode.

                   Result    
                   Start Audio Device Analysis Shared Mode support Speakers (High Definition Audio Device)      

    Supported : 2|16|44100|176400|4
    Supported : 2|24|44100|264600|6
    Supported : 2|32|44100|352800|8
    Supported : 2|16|48000|192000|4
    Supported : 2|24|48000|288000|6
    Supported : 2|32|48000|384000|8
    Supported : 2|16|88200|352800|4
    Supported : 2|24|88200|529200|6
    Supported : 2|32|88200|705600|8
    Supported : 2|16|96000|384000|4
Not supported : 2|24|96000|576000|6
Not supported : 2|32|96000|768000|8
    Supported : 2|16|176400|705600|4
    Supported : 2|24|176400|1058400|6
    Supported : 2|32|176400|1411200|8
    Supported : 2|16|192000|768000|4
    Supported : 2|24|192000|1152000|6
    Supported : 2|32|192000|1536000|8
    Supported : 2|16|352800|1411200|4
    Supported : 2|24|352800|2116800|6
    Supported : 2|32|352800|2822400|8
    Supported : 2|16|384000|1536000|4
    Supported : 2|24|384000|2304000|6
    Supported : 2|32|384000|3072000|8      
                  
                   And I tried to play the same 24bit@96kHz file at dac is 24bit 192kHz..
                   error : Endpoint Create Failed > The DAC does not accept this byte sequence
                   error : 2/32/96000/768000/8
                   error : Device cannot play
                   End

                   I have no more idea then and could not go further.
                   If u ll have any comment .. plZ

                   Sound quality of XXHighEnd s very nice and impressed me so much.

                   Sorry for my english.  It s not my native

Thk

komsansr
Thailand



        
Logged
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #25 on: July 12, 2009, 09:13:06 am »

Well, let me tell you first that all looks the most thorough as can be, and you did/tried all very well. Hats off, also for your presented analysis !

(btw note the Shared Mode test is unofficial, and also unreliable, because although I stuffed it in for helping me a little in these kind of situations, it wasn't finished at the time (of this version)).

I never saw combintations like this, and I do *not* blame W7 for it. Could be, but I don't think so. It merely will be the audio device containing properties I do not anticipate upon sufficiently. Now, I know already that all these "HD Audio" devices can't be dealt with properly, and although this will be part of the base problem, this is just a new one I never saw before.

Coincidentally right now I am working on similar problems for a few days already (not specifically hi-rez related), and I guess I only quit that when I solved it. So far I don't see the solutions (read : I can't see what is wrong, but it still does not work), and exactly like in your case - in Foobar it works. The audio device not working I have at hand here, as I have at hand PCs with the HD Audio devices causing problems (as said, not the same HD Audio as yours). I guess when I found what's wrong with that, I will have solved your problem too. It is the only thing to do anyway, because I don't have such a device here.

I will let you know when I have some results, ok ?
Regards,
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #26 on: July 12, 2009, 11:14:10 am »

Allright, per pure coincidence of the timing of your post, this just have been solved (well, I said I was working on it Happy).

The coincidence is merely about the fact that this problem has been there right from the beginning, and now at last I found the culprit.
Please keep in mind : whether it works for your device just the same has to be awaitened, but I'm confident it will.

It will be in the next version (0.9y), which is hopefully there within two weeks.
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
SeVeReD
Audio Enthusiast
**
Offline Offline

Posts: 599


View Profile WWW Email
« Reply #27 on: July 13, 2009, 04:39:02 am »

Allright, per pure coincidence of the timing of your post, this just have been solved (well, I said I was working on it Happy).

The coincidence is merely about the fact that this problem has been there right from the beginning, and now at last I found the culprit.
Please keep in mind : whether it works for your device just the same has to be awaitened, but I'm confident it will.

It will be in the next version (0.9y), which is hopefully there within two weeks.
Peter

Does this mean you think you've got empirical and benchmark dac things working?  That would be a nice buggerboo to solve.  gl
Logged

0.9z-8-3a WAV/CUE files on HDDs via MB FW400>; Win7 pro ttp://www.phasure.com/index.php?topic=352.msg4021#msg4021); [XXHighEnd player  Qs 7, 0, 0, 0, 0; eng 4; adaptive; scheme#3; player priority low; thread priority realtime; clock res 5ms: SFS 420 Wink dac is 24/192 w/32bits; Play Unattended; Stop Services ticked; Wallpaper & Show Back ticked - Mirror Image unticked; Start Engine unticked;garbage collect ticked; copy files to XX-drive; *quad arc prediction upsampling*: straight contiguous:>PCI FW800 card>Fireface 800 DAC [latency 2048 samples for 176.4]; usb/ethernet/mb audio shut off @ MB
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #28 on: July 13, 2009, 05:47:50 am »

Yes ... although the Benchmark must be tested by someone first, in order to be sure.
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Pages: 1 [2]  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Valid XHTML 1.0! Valid CSS!
Page created in 0.097 seconds with 20 queries.