0.9Z-7: Activation with Code not Paypal--new restore point

XXHighEnd - The Ultra HighEnd Audio Player

April 20, 2024, 02:08:10 pm

Welcome, Guest. Please login or register.
Did you miss your activation email?

News: August 6, 2017 : Phasure Webshop open ! Go to the Shop

Home

Help

XXHighEnd > Ultimate Audio Playback > XXHighEnd Support > 0.9Z-7: Activation with Code not Paypal--new restore point

Pages: [1]

« previous next »

	Author	Topic: 0.9Z-7: Activation with Code not Paypal--new restore point (Read 4153 times)
0 Members and 1 Guest are viewing this topic.

boleary

Crazy Audiophile

Offline

Posts: 1233

0.9Z-7: Activation with Code not Paypal--new restore point

« on: August 18, 2012, 02:08:13 am »

If all is right with your current 9Z-7 setup you might want to make a new restore point now. Today I was ripping and listening to various cd's which meant going back and forth between minimised and full OS. At one point I couldn't get out of minimised so I used my trusty restore point. Once restored I had to reactivate XXhighend! Am assuming this happened because the OSX file from the official release was eliminated during the restore. So if I had created a new restore point with the "New" OSX file from my last succesful activation, I assume I wouldn't have had to reactivate?

The good news is I was able to cut and paste the activation code after following the procedure requiring that one uses XX enough --play a track/close /open/ play a track ,etc. Hope this post makes sense !


	Logged

XX2.07/MB: ASRock Extreme 4M , i7-3930K @ 0.5GHz/ RAM-OS W10586/32 Gigs 1600 DDR3/ Clarixa usb cable /Q1,3,4,5 = *14*/1/1/*1* / *Q1Factor = 1* / Peak Extension: Off/Dev.Buffer = 4096 / ClockRes = *.5ms* / Straight Contiguous / SFS = *.02,/ Do Nothing With Cover Art / not Invert / *(Phase Alignment Off / Playerprio = Low / ThreadPrio = Real Time / Scheme = 3-5 / UnAttended (Just Start) / *All* Services Off except LAN & RDC/ Persist off/No OSD / No Running Time / Minimize OS / Boost on/XTweaks : Balanced Load = *40* / Nervous Rate = 1/ Cool when Idle = NA / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Best/ Time Stability = On/ No Up-sampling/R-2R DAC

PeterSt

Administrator
High Grade Audiophile

Offline

Posts: 16837

Re: 0.9Z-7: Activation with Code not Paypal--new restore point

« Reply #1 on: August 18, 2012, 08:06:44 am »

I don't think that much of this happened like this. At least I don't see a relation anywhere. But when the part is left out that the install had to be redone, well ...
Ah, you did not perform a reinstall ? Okay then you are now using another version. Or not because you extracted that again. Or not because you tried to install the same version several times and made a restore point somewhere in between. Or something else. Haha.

Summarized, how it got that you needed to activate - no idea. But since either or all of the above must have happened, what to think.

Peter


	Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator

Pages: [1]

« previous next »

Jump to:

Page created in 0.047 seconds with 19 queries.