XXHighEnd - The Ultra HighEnd Audio Player
December 13, 2018, 09:46:44 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: August 6, 2017 : Phasure Webshop open ! Go to the Shop
Search current board structure only !!  
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Audio PC doesn't see Phasure NOS1  (Read 332 times)
0 Members and 0 Guests are viewing this topic.
Stanray
Audio Enthusiast
**
Offline Offline

Posts: 286


View Profile Email
« on: December 04, 2018, 11:19:47 pm »

Hi Peter,

Tonight, I planned to continue my listening sessions and enjoy the glorious sound (especially since the Lush^2). Yesterday, after listening I just left the Audio PC and Musicserver PC as they were (I didn’t shut them off).

When trying to continue with the album I left yesterday, I got the message that the audio device could not be found.

The USB Audio Control Panel indicates that the driver is not available. Turning OFF the NOS1 and a few minutes later ON again doesn’t help. Also the DC-offset displays show “-1mV”, instead of the usual values. And I recall that there should be a LED visible in the left leg of the NOS1 and now it isn't.

Furthermore I now recall that during the past 2 weeks or so, when turning ON the AudioPC, the speakers produced a soft, distant and distorted sound, and only when shutting the NOS1 OFF and ON again, the normal sound returned.

What to make of this? Broken NOS1? Cry

Regards,
Stanley
Logged

AudioPC: Passive (no fans)/ Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans, NoFan 80 EH passive CPU cooler/ Music via LAN on HDD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on Ipad <-> Wifi <-> router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.

01-10-2018: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.10 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1 / Q1Factor = 20/ Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 80.19 (max 80.19)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 32, 10, -, 0, 1/ Time Performance Index = Optimal / Time Stability = On / Arc Prediction 16x / -> Lush^2 USB-cable 70cm > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro Balanced Monoblocks> speakers: Apogee Acoustics Scintilla (rebuild).
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 15320



View Profile Email
« Reply #1 on: December 05, 2018, 03:17:59 am »


Hi Stanley,

Quote
What to make of this? Broken NOS1? Cry

Maybe ...
Does the same happen when you use the U USB input ? (this skips the Phisolator)

For further analysis it's easiest if you take of the cover and observe the green led you refer to in the left hand leg (on that PCB which is the USB board) when you plug out/in the USB cable (better is off/on the NOS1 but it's a bit chicken-egg when you don't know whether the cable socket(s) may not be right). Start the NOS Driver Control Panel. You can see various options, like
a. stays all dark;
b. turns solid green without flashing;
c. starts flashing but stops after 1-2 seconds.
d. flashes as normal.

If you never see anything good happen (which would be d.) then it's good to verify with an other USB cable.

Regards,
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - Oct 31, 2018 (2.10)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 10/20 cores) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 10 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 140.19  (max 140.19) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = 35 / Nervous Rate = 10 / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^2*A:B-W-Y-R, B:B-W-R* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> *Blaxius^2 A:B-R, B:B-R* Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Stanray
Audio Enthusiast
**
Offline Offline

Posts: 286


View Profile Email
« Reply #2 on: December 05, 2018, 09:56:37 am »

Hi Peter,

This is what I found:

- Connecting the Lush^2 with the U USB input: no LED.
- Connecting another USB cable to the i USB input: no LED.
- Connecting another USB cable to the U USB input: solid green LED.

Does this make sense to you?

Regards,
Stanley
Logged

AudioPC: Passive (no fans)/ Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans, NoFan 80 EH passive CPU cooler/ Music via LAN on HDD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on Ipad <-> Wifi <-> router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.

01-10-2018: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.10 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1 / Q1Factor = 20/ Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 80.19 (max 80.19)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 32, 10, -, 0, 1/ Time Performance Index = Optimal / Time Stability = On / Arc Prediction 16x / -> Lush^2 USB-cable 70cm > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro Balanced Monoblocks> speakers: Apogee Acoustics Scintilla (rebuild).
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 15320



View Profile Email
« Reply #3 on: December 06, 2018, 04:28:40 pm »

Stanley,

Sorry for a late response ...

No, does not make sense really. I assume you can not get music out of it either way, am I right ?

Did you try another USB port on the PC ?

Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - Oct 31, 2018 (2.10)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 10/20 cores) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 10 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 140.19  (max 140.19) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = 35 / Nervous Rate = 10 / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^2*A:B-W-Y-R, B:B-W-R* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> *Blaxius^2 A:B-R, B:B-R* Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Stanray
Audio Enthusiast
**
Offline Offline

Posts: 286


View Profile Email
« Reply #4 on: December 06, 2018, 08:31:30 pm »

I rebooted the Audio PC and did the following tests:

1. €1 USB cable in i: driver shows, but “playback stopped because the data did not arrive in time”.
2. €1 USB cable in U: driver shows, but “playback stopped because the data did not arrive in time”.

3. Old Lush USB cable in i: Driver shows, Sound OK.
4. Old Lush USB cable in U: Driver shows, Sound OK.

5. Lush^2 USB cable in i: No driver.
6. Lush^2 USB cable in U: Driver shows, Sound OK.

Other USB ports on the PC make no difference.

 scratching

Regards,
Stanley
Logged

AudioPC: Passive (no fans)/ Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans, NoFan 80 EH passive CPU cooler/ Music via LAN on HDD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on Ipad <-> Wifi <-> router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.

01-10-2018: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.10 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1 / Q1Factor = 20/ Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 80.19 (max 80.19)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 32, 10, -, 0, 1/ Time Performance Index = Optimal / Time Stability = On / Arc Prediction 16x / -> Lush^2 USB-cable 70cm > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro Balanced Monoblocks> speakers: Apogee Acoustics Scintilla (rebuild).
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 15320



View Profile Email
« Reply #5 on: December 07, 2018, 03:51:44 pm »


Stanley - this is too strange;
Did you change anything else in the music room or even the house ?

and/or

Quote
6. Lush^2 USB cable in U: Driver shows, Sound OK.

What happend, you reckon, that this suddenly works ? (earlier on you told that that did not work as well)

Regards,
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - Oct 31, 2018 (2.10)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 10/20 cores) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 10 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 140.19  (max 140.19) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = 35 / Nervous Rate = 10 / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^2*A:B-W-Y-R, B:B-W-R* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> *Blaxius^2 A:B-R, B:B-R* Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Stanray
Audio Enthusiast
**
Offline Offline

Posts: 286


View Profile Email
« Reply #6 on: December 07, 2018, 10:02:25 pm »

Did you change anything else in the music room or even the house ?

No, there were no changes in the house or the room.

Quote
Quote
6. Lush^2 USB cable in U: Driver shows, Sound OK.

What happend, you reckon, that this suddenly works ? (earlier on you told that that did not work as well)


I think it worked  after switching the NOS1 OFF and ON again (see below).

Today I repeated the tests with the (old) Lush and the Lush^2 connected to USB 2.0 and USB 3.0 PC ports. The USB 2.0 and 3.0 ports showed the same results:

1. Lush in i: driver shows, but “playback stopped because the data did not arrive in time”.
Then switched OFF and ON the NOS1 and music plays, but very distant.
Then switched OFF and ON the NOS1 again and music plays OK.
2. Lush in U: driver shows,“playback stopped because the data did not arrive in time”.
Then switched OFF and ON the NOS1 and music plays, but very distant.
Then switched OFF and ON the NOS1 again and music plays OK.

So with Lush all works, but not stable and rebooting the Audio PC gives the same "uncertain" results and asks for turning the NOS1 OFF and ON until it's stable and the music plays.

3. Lush^2 in i: no driver shows.
2. Lush^2 in U: driver shows, but again changing situations: “playback stopped because the data did not arrive in time”.
Then switched OFF and ON the NOS1 and music plays, but very distant.
Then switched OFF and ON the NOS1 again and music plays OK.

With Lush^2 i doesn't work at all and U only after turning NOS1 OFF and ON until it starts working.

 scratching

 unsure

Regards,
Stanley
Logged

AudioPC: Passive (no fans)/ Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans, NoFan 80 EH passive CPU cooler/ Music via LAN on HDD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on Ipad <-> Wifi <-> router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.

01-10-2018: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.10 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1 / Q1Factor = 20/ Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 80.19 (max 80.19)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 32, 10, -, 0, 1/ Time Performance Index = Optimal / Time Stability = On / Arc Prediction 16x / -> Lush^2 USB-cable 70cm > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro Balanced Monoblocks> speakers: Apogee Acoustics Scintilla (rebuild).
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 15320



View Profile Email
« Reply #7 on: December 08, 2018, 01:12:07 am »


Quote
but “playback stopped because the data did not arrive in time”.

This is the most suspicious of all because this is just software (setting). Not that it is intuitive, but it is. And I bet you that this is since people are telling (you) a different SFS than 140.19. For example, 70.19 gives exactly your problem, while 80.19 works. And someone (Robert) suggested the 70.19 ...

Quote
Then switched OFF and ON the NOS1 and music plays, but very distant.

If possible this is even more suspicious because it tells (to me) that you did not check the DC Offset, which, mind you, is quite consistently at the "1/-1" position after switching off/on the G3 version of the NOS1a (or reboot the PC or replug the cable). So earlier on you told about this all right, but this time you omitted the checking for this ? And switch off/on a next time and it is fine (also quite consistently).

Nothing is broken (I think) but you broke in to a relatively long time of "it works at this setting" and now suddenly all is "unknown" at changing something.
I had the same this week, up to rebooting by Audio PC which did not help ...

Happy

I can't guarantee it, but ...
Let me know how you fare.
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - Oct 31, 2018 (2.10)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 10/20 cores) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 10 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 140.19  (max 140.19) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = 35 / Nervous Rate = 10 / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^2*A:B-W-Y-R, B:B-W-R* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> *Blaxius^2 A:B-R, B:B-R* Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
arvind
Audio Enthusiast
**
Offline Offline

Posts: 480


View Profile
« Reply #8 on: December 08, 2018, 05:45:56 am »

Hi Stanley,

It has been my experience, if your SFS is high, like 60.19 (as per your signature), you need to bring down xQ otherwise you get the problem of data not arriving in time.

Maybe you could try this out.

Best regards,

Arvind
Logged

W10-14393.0 RAM OS / Mach III LPS 14/28/XXHE 2.10c/Engine#4/Adaptive Mode/16x /Arc Predict/Q= 30/1/1/1/xQ=20/Device Buffer:4096/PA= Off/Minimise OS/PE=off/Unattended/Stop All Services/SFS=10.19/140.19(max)/ClockRes= 15ms/Straight Contiguous/Music on NAS/Lush^2 USB cable A:B-W-Y-R; B: B-W-R/Phasure NOS 1a/75b/G3 USB DAC. Blaxius^2 A: B-R; B: B-R. Orelo MK II active speakers. Driver version 1.04/Driver Buffer 4ms. OSD text = Off
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 15320



View Profile Email
« Reply #9 on: December 08, 2018, 10:05:31 am »


Thank you Arvind, I indeed eperienced the same.
Btw, I ended up with 80.19, leaving all else the same.

The cause indeed is the actually way large implied buffer by Q1 x xQ1. This is actually illegal. You will notice when you, for fun, switch on the Running Time. A message will tell you that the time can't be updated each second, already when Q1 is 30 and xQ1 is larger than 3. If you continue you will see that the Time is not properly updated at all (this is solved for the next version).
This stuff is aldo the cause of tracks ending abrubtly (per album).

In the very end these are all anomalies of the strange combination we apply lately (like last 6 months or so) and which strangely never was tried before in all these years. Slowly we start to "find out" the real anomalies under the hood. But working on them (or some) ...

Peter

Logged

For the Stealth III LPS PC :
W10-14393.0 - Oct 31, 2018 (2.10)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 10/20 cores) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 10 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 140.19  (max 140.19) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = 35 / Nervous Rate = 10 / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^2*A:B-W-Y-R, B:B-W-R* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> *Blaxius^2 A:B-R, B:B-R* Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Stanray
Audio Enthusiast
**
Offline Offline

Posts: 286


View Profile Email
« Reply #10 on: December 08, 2018, 12:15:44 pm »

 blush1   blush2

Thank you Peter and Arvind,

Now things are starting to become a lot more clear. I have been fiddling with the SFS settings (of course), but forgot about it because of other things happening around me at the same time. A mental overload followed by amnesia.

I went back from SFS=140.19 to my old settings SFS=20.19 and SFS=60.19, but, indeed, with the high xQ setting.

Changing to SFS=80.19 now shows normal behavior. With both Lushes  very happy, the green LED blinks and the DC-offset shows the target values after following the procedure.

Now the weekend can commence.

Thanks again.

Regards Stanley 
Logged

AudioPC: Passive (no fans)/ Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans, NoFan 80 EH passive CPU cooler/ Music via LAN on HDD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on Ipad <-> Wifi <-> router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.

01-10-2018: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.10 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1 / Q1Factor = 20/ Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 80.19 (max 80.19)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 32, 10, -, 0, 1/ Time Performance Index = Optimal / Time Stability = On / Arc Prediction 16x / -> Lush^2 USB-cable 70cm > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro Balanced Monoblocks> speakers: Apogee Acoustics Scintilla (rebuild).
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 15320



View Profile Email
« Reply #11 on: December 08, 2018, 12:30:32 pm »


Stanley, believe me. For me it happens just the same. I recall with this very situation that I have up because there was 10 minutes of "play time" left anyway, and rebooting the PC as a kind of solution was of no further use. I left that to the next day. Then, with more calmth and less annoyance I could recall what I all did the previous day ... an I set all back. Only later I learned that 80.19 does work. I suppose all above that works too. 60 and lower I think all works. 70 coincidentally does not.
Believe me, you are not "special" regarding this. Happy

Broken NOS1 count is still at zero. Haha.
(apart from two or three I think who blew the USB interface by means of doing something which should not have been done)

Enjoy the weekend !
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - Oct 31, 2018 (2.10)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 10/20 cores) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 10 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 140.19  (max 140.19) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = 35 / Nervous Rate = 10 / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^2*A:B-W-Y-R, B:B-W-R* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> *Blaxius^2 A:B-R, B:B-R* Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Valid XHTML 1.0! Valid CSS!
Page created in 0.055 seconds with 19 queries.