XXHighEnd - The Ultra HighEnd Audio Player
April 19, 2024, 01:46:53 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: August 6, 2017 : Phasure Webshop open ! Go to the Shop
Search current board structure only !!  
   Home   Help Search Login Register  
Pages: 1 2 [3]  All
  Print  
Author Topic: Purepower 2000  (Read 50234 times)
0 Members and 1 Guest are viewing this topic.
juanpmar
Crazy Audiophile
****
Offline Offline

Posts: 1236


View Profile Email
« Reply #30 on: March 30, 2011, 02:53:47 pm »

It seems that to use an UPS is not a good idea if we talk just about sound quality. But:

- What about the data (songs) you have in the hard drives?. Could they be lost in case of a blackout?

- What if I connect the UPS into the power wall and a passive isolation or transformers to the UPS on one side and to the computer on the other side?. Couldn´t the transformers clean the dirt of the UPS and computer while at the same time the computer would be protected from a power blackout?. 

On the other hand, some time ago I´ve tried several different power conditioners from Isotek, PS or Audience and my conclusion is that none of them provides something different than what I´d call just a tone control, similar to what some sophisticated power cords do. At this time I don´t use any power conditioner and only would use one if I can protect the data and at the same time not harm the sound. That´s why I´m interested in the UPS on-line.
Logged

Audio Pc: Processor i7 970: 3200MHz (reduced to 1668MHz), 6+6 cores/ RAM Corsair DDR3, 24Gb, 1333MHz/ Mb Asus X58 Sabertooth/ OS and XXHE in Peter's RAM-Disk / The CPU fan is the only one in the Audio Pc: NF-S12A (600rpm/6.7db)/ No graphic card/ Power supply: Seasonic SS-400FL2, fanless.

Configuration and Updates in HOW I'VE BUILT MY NEW PC...http://www.phasure.com/index.php?topic=1673.0. This post is very old but maybe someone still find it useful

XXHighEnd: 2.11a. Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN/ KS:Phasure NOS1 Out 4.0/ #4 Engine/ Adaptive Mode/ Q1=10, Q3,4,5=1, xQ1=15/ Dev.Buffer: 4096/ ClockRes: 15ms/ Straight Contiguous/ SFS: 0.69 (max 0,69)/ Not Invert/ Phase Alignment Off/ Allow format change/ Decode HDCD/ Playerprio: Low/ ThreadPrio: Real Time/ Scheme: Core 3-5/ UnAttended/ Not Switch during Playback Off/ Playback Drive none/ UnAttended/ Include Garbage Collect/ Copy to XX Drive by standard/ Always clear Proxy before Playback/ Stop Desktop Services/ Stop Remaining Services/ Stop All Services: Off/ Keep LAN Services: On - Persist: Off/ Use Remote Desktop/ Minimize OS/ XTweaks : Balanced Load 35/ Nervous Rate 10/ Cool when Idle -/ Provide Stable Power 0/ Utilize Cores always 1/ Time Performance Index: Optimal / Time Stability: Stable / Arc Prediction/ Number of cores in use: 12 (máx. 6-12)

Music Server PC (W10) totally silent with OS (W10) in SSD and music inside in SSDs - RDC > Ethernet Gigabyte cable 3m > Audio Pc > 1m USB Lush cable directly from the USB3.0 in the motherboard > PHASURE NOS1a-75B-G3 (Driver v1.0.4) 16ms > Blaxius BNC interconnects > Genelec 1037B 3-Way Active speakers with BNC inputs
Suteetat
Audio Loudspeaker
*
Offline Offline

Posts: 128


View Profile Email
« Reply #31 on: April 01, 2011, 09:27:36 am »

Has anyone tried an UPS (Uninterruptible Power Supply) with the computer?. The UPS besides to protect the computer when the input power fails also filtrates the mains. I wonder if an UPS could affect in any way the sound of the system with the NOS1 in it.

I tried one of those true online double conversion UPS thing for computer and it was no good eventhough I picked one that is quite a bit bigger than what my music server needs. Dynamic was limited quite a bit. I did not try PurePower but I also tried PS Audio Powerpack 1500 (I think). It was better than the true online UPS but it still degraded the sound a bit. Now I just plug my computer right into my passive power conditioner which plugged into Isoclean isolated transformer.

Unfortunately I live on 11th floor of an apartment building. I wish I could try the separate ground rods for my stereo system. Somehow I don't think stikcing copper rod into my flower pot on the balcony will work unhappy
Logged

Intel i7 950 12GB DDR3 triple channel, Win7 64bit sp1 on SSD,
firewire -> Weiss INT202 -> Playback MPS-5-> ??

0.9z-4, KS-adaptive, buffer 256, Q1=1, no oversampling, SFS 100, straight contiguous,
minimum Clock Resolution, Scheme 2
praphan
Audio Enthusiast
**
Offline Offline

Posts: 242


View Profile Email
« Reply #32 on: April 01, 2011, 06:12:19 pm »

It seems that to use an UPS is not a good idea if we talk just about sound quality. But:

- What about the data (songs) you have in the hard drives?. Could they be lost in case of a blackout?

Hi

Music files should be treated the same way as other valuable data files. Power failure is not the only cause of data loss. HDD crash, virus infection ........ You name it.

You need to back up your valuable music files.

Praphan
Logged

PC: Asus X58 chipset M/B; Seasonic 850W PSU; i7 970 12 threads (HT=on); ATI HD 5770; Zalman Reserator water cooling, 24GB RAM, Plextor PX230A drive ; W7 Pro 64bit plain SP1 (no further update) and XXHE on Velociraptor; music on Sata 3 2 TB HDD; WD5003ABYX sits on Thermaltake USB3 dock as playback drive; Star Tech PCIe USB3 card

XX 0.9z-8-3a : KS Engine 4 "Adaptive"; DB = 4096; APx16; Q1/2/3/4/5 = 14x1/0/0/0/0; No Appointment/low/real time; CR = 0.5 ms; XTweaks Ultimate; SC; SFS= 120/120 ; allow format change; unattended ; min OS and stop "all" services; normalized volume usually played at -15db ;  peak extension on ; PA off

Signal chain: 24/786 NOS1 USB; 16 ms buffer on driver 1.0.2 => Valhalla XLR IC = > McIntosh 2301 tube monoblocks => Purist Dominus spk cable => B&W 802 D
juanpmar
Crazy Audiophile
****
Offline Offline

Posts: 1236


View Profile Email
« Reply #33 on: April 01, 2011, 09:54:05 pm »

Thanks Praphan and Suteetat, I´m going to forget about the UPS and probably I´ll use some kind of pasive filter as you said.
Logged

Audio Pc: Processor i7 970: 3200MHz (reduced to 1668MHz), 6+6 cores/ RAM Corsair DDR3, 24Gb, 1333MHz/ Mb Asus X58 Sabertooth/ OS and XXHE in Peter's RAM-Disk / The CPU fan is the only one in the Audio Pc: NF-S12A (600rpm/6.7db)/ No graphic card/ Power supply: Seasonic SS-400FL2, fanless.

Configuration and Updates in HOW I'VE BUILT MY NEW PC...http://www.phasure.com/index.php?topic=1673.0. This post is very old but maybe someone still find it useful

XXHighEnd: 2.11a. Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN/ KS:Phasure NOS1 Out 4.0/ #4 Engine/ Adaptive Mode/ Q1=10, Q3,4,5=1, xQ1=15/ Dev.Buffer: 4096/ ClockRes: 15ms/ Straight Contiguous/ SFS: 0.69 (max 0,69)/ Not Invert/ Phase Alignment Off/ Allow format change/ Decode HDCD/ Playerprio: Low/ ThreadPrio: Real Time/ Scheme: Core 3-5/ UnAttended/ Not Switch during Playback Off/ Playback Drive none/ UnAttended/ Include Garbage Collect/ Copy to XX Drive by standard/ Always clear Proxy before Playback/ Stop Desktop Services/ Stop Remaining Services/ Stop All Services: Off/ Keep LAN Services: On - Persist: Off/ Use Remote Desktop/ Minimize OS/ XTweaks : Balanced Load 35/ Nervous Rate 10/ Cool when Idle -/ Provide Stable Power 0/ Utilize Cores always 1/ Time Performance Index: Optimal / Time Stability: Stable / Arc Prediction/ Number of cores in use: 12 (máx. 6-12)

Music Server PC (W10) totally silent with OS (W10) in SSD and music inside in SSDs - RDC > Ethernet Gigabyte cable 3m > Audio Pc > 1m USB Lush cable directly from the USB3.0 in the motherboard > PHASURE NOS1a-75B-G3 (Driver v1.0.4) 16ms > Blaxius BNC interconnects > Genelec 1037B 3-Way Active speakers with BNC inputs
PNCD
Audio Loudspeaker
*
Offline Offline

Posts: 7


View Profile
« Reply #34 on: May 04, 2011, 10:16:21 pm »

I am a XXHighEnd user with a bad experience of PurePower to contribute to those considering it.

I tried to purchase a PurePower 1050i in October 2010.  The European distributor had two available at a discount (I gathered later that they were flushing old stock) and I ordered one.  It took three weeks to do just that - the man was a terrible communicator.  The unit arrived, eventually, after a month.  On plugging it in, the display immediately went to FAULT!!!.  The unit passed a current to my equipment (at that point just a lamp as a precaution), but the display was clear, even when restarted.  I asked if there was anything I should do before returning it.  After one week of fruitless back and forth I stated that I wanted to return the unit as I no longer had confidence in the product or the company.  No reply for five days until I sent another email demanding a response with a read receipt.

At that point the US Sales Director got involved who immediately relayed to me the wonderful accolades that a recent customer in Scotland had sent.  He ended with:  PurePower is the real deal, worth a little bit of hassle for what it does.  I guess that is why he is head of sales!  He won, I wanted the unit after all, so I tried to work with a technical guy in Canada.  The result was Fault!!!

It took ten days before I got a response from the USA that he would get the European to arrange for a return.  It is now 16 weeks later.  The unit was returned only five weeks ago, and I heard nothing back from Europe or the US.  I sent an ultimatum last week that I would put the matter in the hands of an attorney if I did not receive a confirmation of payment by the end of today.  The Head of Sales read it, but never responded.  The European distributor responded with a promise to make the payment.  Today I notified them that they had missed the deadline and immediately received a response that the payment was sent and they could fax me the slip.  That was followed by an email saying that the payment failed, despite them having my international payment instructions since December.

A long story.  I am contributing this because I would have wanted to read it when I was looking into PurePower. 
Logged
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16837



View Profile Email
« Reply #35 on: May 05, 2011, 11:51:06 pm »

Sad story ...

What I would do (I realy would) is threaten them by stating their names right in this topic if nothing changes, put some nasty (but reality !) words like "hoax" next to it, and wait for Google to catch it (usually within the few hours for this forum). So, don't put that in any posts yet, because they (all instances) have to have one chance, and you shouldn't be sued for spreading the wrong word. Give them a link to this topic (your post above) if you want. Point out that sales really will drop because of your upcoming post.

Give them a quote like

"PurePower 1050i in October 2010"

to feed into Google, and proove to them that it will really work the very same with whatever names you are going to mention later, if needed.

I hope it works out for you !!
Peter

Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
eArch
Audio Loudspeaker
*
Offline Offline

Posts: 11


View Profile
« Reply #36 on: May 07, 2011, 02:48:35 am »

 OffTopic  I feel for you, PNCD.

I have yet to experience the same level of support like what Peter has provided in the stereophile/audiophile market without paying $$$ for their products first.
Logged
doublelife
Audio Loudspeaker
*
Offline Offline

Posts: 57


View Profile
« Reply #37 on: January 09, 2016, 01:46:50 pm »

Anybody still using one of these Pure Power regenerators with their NOS1a?
Logged

PC  i7 / W10 10074 (x64) / hyperthreading ON (12 cores) / 32GB RAM / XX - OS on separate dedicated 256GB SSD - XXHighEnd: 2.03 / Engine#4 Adaptive / 4096 / Q1=14  / xQ1=10 / Q3,4,5=0/1/0 / SFS=4-120 / Straight Contiguous / Clock Resolution = 1.0  / Scheme 3-5 / 16x Custom / Peak Extend = OFF / Unattended / Minimize OS / Phase Alignment = OFF / XTweaks = 43, 100, 1, 1, 1 > 24/768 NOS1a 75B async USB DAC driver v1.0.4 1ms > KGSSHV Carbon amp > Stax SR-009
Pages: 1 2 [3]  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Valid XHTML 1.0! Valid CSS!
Page created in 0.071 seconds with 20 queries.