|
Stanray
|
 |
« Reply #225 on: October 30, 2016, 08:39:25 pm » |
|
Hi Stanley,
Yes, you figured that you would be the one most benefitting from the new G3 setup. Ha ! with double BNC per channel that really matters !
Nice ...
Peter
 |
|
|
|
|
Logged
|
AudioPC: Passive (no fans)/ Intel i7-2600S @ 1600 MHz/ / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans, NoFan 80 EH passive CPU cooler/ Music via LAN on HDD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on Ipad <-> Wifi <-> router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.
01-04-2018: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.10 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1 / Q1Factor = 40/ Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 10.19 (max 120)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 52, 10, -, 1, 1/ Time Performance Index = Optimal / Time Stability = On / Arc Prediction 16x / -> Lush USB-cable 70cm > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (4ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro Balanced Monoblocks> speakers: Apogee Acoustics Scintilla (rebuild).
|
|
|
|
AlainGr
|
|
« Reply #226 on: October 30, 2016, 09:57:49 pm » |
|
Well, I did not think that my NOS1a would miss the Netherlands so early after my upgrade to the "a" version, but I will be faster this time! Count me in please  Regards, Alain |
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,16GB ram 1333Mhz,Win 8 pro 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = 1ms,Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = no,all OSD off,SFS =0.4,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Clearlink USB 2 cable,Phasure NOS1 DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2).
|
|
|
Mamba315
Audio Loudspeaker
 Offline
Posts: 62
Ferrari NOS1a
|
|
« Reply #227 on: October 30, 2016, 10:18:18 pm » |
|
Peter, Please add me to the list as well  Matt |
|
|
|
|
Logged
|
|
|
|
|
Tore
|
|
« Reply #228 on: October 30, 2016, 11:05:42 pm » |
|
Peter,
i want this upgrade too
Tore
|
|
|
|
|
Logged
|
Audio PC: Phasure Mach II / Win 14393.0 on RAM-OS / controlled by RDC, no GPU card installed / connected directly to music server
XXHighEnd: 2.10 / Minimize OS / Engine#4 Adaptive / DB=4096 / *testing*: Q1=30 / xQ1=40 / Q3,4,5=1 / SFS=5.19 / XTweaks = 52, 10, 0, 0, 1 / Straight Contiguous / Clock Resolution = 15ms / Scheme 3-5 (low/realtime) / 16x Custom High / Unattended
Driver v1.0.4b (*16ms*)
USB3 port -> *Lush* -> Phisolator -> Phasure NOS1a B75 G3 - Triode Lab 2A3M-II Monoblocks, Avantgarde Duo Omega.
|
|
|
briefremarks
Audio Loudspeaker
Offline
Posts: 109
|
|
« Reply #229 on: October 31, 2016, 04:01:25 am » |
|
Peter,
Add me to the list too please.
Ramesh
|
|
|
|
|
Logged
|
Audio PC: Stealth PC; RAM-OS W10 14393.0.
XXHE version 2.10.
Music Server: XXHE PC, RDC to Audio PC
XXHE settings: Q1 30x40, Q3/4/5 1/1/1, SFS 5.19 (Max 120), Clock Res 15ms, Core Scheme:3-5, Driver Buffer 16ms, Balanced Load 52, Nervous Rate 10.
Audio PC -> Lush USB cable -> NOS1(a,75B, G3) -> Blaxius cables (BNC) -> Orelo Mk II active speakers
|
|
|
|
Nick
|
|
« Reply #230 on: October 31, 2016, 03:17:26 pm » |
|
Hi Peter,
Please count me in for the upgrade too.
Nick.
|
|
|
|
|
Logged
|
28 core CPU Audio PC / w10 10393 RAM OS => XX V2.09 / adaptive mode / XX buffer 4096 / NOS USB driver v 1.02 buffer 8ms / Q1,2,3,4,5 = 14,0,0,0,1 / xQ1 =1 / unattended / SFS 1.8Mb / memory straight continuous / system clock 1.0ms / Threadprio RealTime / Playerprio Low / CPU scheme 3-5 / 16x Arc Prediction / Peak Extend off / Phase alignment off / Phase off / XTweaks : Balanced Load 43 / Nervous Rate 1 / Cool when Idle n/a / Provide Stable Power 1 / Utilize Cores always 1 / Time Performance Index = Optimal / Time Stability On => Lush USB cable => modified NOS1 USB DAC => no pre amp => Orelo active horn loudspeakers
Music server 16 core LGA 2011 PC.
System powered from two 3kva balanced mains isolation transformers.
|
|
|
|
Scroobius
|
|
« Reply #231 on: October 31, 2016, 03:40:38 pm » |
|
And of course put me down as well Cheers Paul |
|
|
|
|
Logged
|
W10-14393.0 - RAM Disc XXHighEnd Mach II Stealth LPS PC -> Xeon E5 2040v4 with Hyperthreading On (20 cores)* @~720MHz, 32GB, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1/ Q1Factor = *1* / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *3.0* (max 120) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = 43 / Nervous Rate = 100 / Cool when Idle = n.a / Provide Stable Power = 0/ Utilize Cores always = 1 / Time Performance Index = Not the best (OS from RAM issue) / Time Stability = Off (OS from RAM issue) / Custom Filter low(12220) 705600 / -> USB3 from MoBo -> Lush USB 70cm -> Phisolator -> 24/768 Phasure NOS1a G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink -> Orelino MkII Active Open Baffle Horn Speakers.
|
|
|
Mamba315
Audio Loudspeaker
Offline
Posts: 62
Ferrari NOS1a
|
|
« Reply #232 on: November 01, 2016, 12:46:28 am » |
|
Peter,
Does Phasure have BNC --> 1/4 TRS female cables available for those who might want to try headphones on their NOS1a 75B G3 DAC?
Matt
|
|
|
|
|
Logged
|
|
|
|
esimms86
Audio Loudspeaker
Offline
Posts: 79
|
|
« Reply #233 on: November 01, 2016, 04:41:03 am » |
|
Count me in for an upgrade cheaper than a pair of cables LOL!
Esau
|
|
|
|
|
Logged
|
2010 mac mini running Windows 7 Professional N 64bit *SP1* and XXHE on SSD in Boot camp mode, mac os x Snow Leopard with Audirvana Plus also on SSD, music on separate 2 Tb firewire La Cie HD / 8 Gb RAM/ Engine#4 *Adaptive Mode* / Q1/2/3/4/5 = *30*/0/0/0/0 (Dev.Buffer = *4096*) / ClockRes = *15ms* / Straight Contiguous / SFS = 170 / not Invert / Playerprio = Low / ThreadPrio = Real Time / Scheme = 3/ *Minimize OS = On* / 24/768 Phasure/Is Phasure NOS1/ NOS1 async USB DAC, Driver v1.0.2 -> Marantz PM KI Pearl amplifier ->Gallo Strada/Gallo TR3 subwoofer
|
|
|
|
Leo
|
|
« Reply #234 on: November 01, 2016, 08:02:25 am » |
|
me too please!
|
|
|
|
|
Logged
|
Dedicated silent audio pc HFX classic, Windows 8 pro 64bit / Intel 3930 CPU 6 cores 12 threads, ASRock x79 Extreme4-M/ SeaSonic Platinum 400w ATX PSU / 16Gb RAM , music on (SATAIII), MinOS/ Engine#4 Special Mode / Q1/2/3/4/5 = *6*/0/1/1/1 Qf=1 (Dev.Buffer = 4096) / not Invert / Playerprio = Low / ThreadPrio = Real Time / *Scheme = 1-2* @ UnAttended /Services Off + No Running Time / Octo Arc Prediction Upsampling / *SFS=0,4 max= 120* XT Tweaks balanced load 43, nervous=100, cool when idle 1, Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = On / Double Octo Arc Prediction Upsampling / -> USB with Dexa clock -> 24/768 Phasure NOS1 async USB DAC, Driver v1.0.3 (2ms) -> direct to AMP: Gainclone mid high, Hypex DPS400 low, horn system (tractrix for mid/high, BD for bass with Oris200)
|
|
|
|
PeterSt
|
|
« Reply #235 on: November 01, 2016, 08:24:31 am » |
|
Peter,
Does Phasure have BNC --> 1/4 TRS female cables available for those who might want to try headphones on their NOS1a 75B G3 DAC?
Matt
Hi Matt, Quick response : What I use myself for testing (not important what) is BNC to RCA female. So that exists. And from there you could go further. But this does not seem the best to me. I can do some research for you though ... Regards, Peter |
|
|
|
|
Logged
|
For the Stealth LPS PC :
W10-14393.0 - March 23, 2018 (2.10)
XXHighEnd Mach II Stealth LPS PC -> Xeon E5 2640v4 with Hyperthreading On (20 cores) @~720MHz, 32GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 40 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *5.19* (max 120) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *52* (*43 ??*) / Nervous Rate = *10* / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (*16ms*) -> B'ASS Current Amplifier -> Blaxius Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
PeterSt
|
|
« Reply #236 on: November 01, 2016, 08:27:22 am » |
|
Thanks everybody !!
I am putting you all on this new list. I think I will merge priorities with the old list. Thus, those on that one too but higher up, will be higher up in this list as well. I think that is fair.
Best regards,
Peter
|
|
|
|
|
Logged
|
For the Stealth LPS PC :
W10-14393.0 - March 23, 2018 (2.10)
XXHighEnd Mach II Stealth LPS PC -> Xeon E5 2640v4 with Hyperthreading On (20 cores) @~720MHz, 32GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 40 / Dev.Buffer = 4096 / ClockRes = 15ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *5.19* (max 120) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *52* (*43 ??*) / Nervous Rate = *10* / Cool when Idle = n.a / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / *Arc Prediction Filtering (16x)* / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (*16ms*) -> B'ASS Current Amplifier -> Blaxius Interlink -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
juanpmar
|
|
« Reply #237 on: November 01, 2016, 08:38:32 am » |
|
Please put me on the list as well.
Best regards,
Juan
|
|
|
|
|
Logged
|
Audio Pc: Processor i7 970: 3200MHz (reduced to 1668MHz), 6+6 cores/ RAM Corsair DDR3, 24Gb, 1333MHz/ Mb Asus X58 Sabertooth/ OS and XXHE in Peter's RAM-Disk / The CPU fan is the only one in the Audio Pc: NF-S12A (600rpm/6.7db)/ No graphic card/ Power supply: Seasonic SS-400FL2, fanless. Configuration and Updates in HOW I'VE BUILT MY NEW PC... http://www.phasure.com/index.php?topic=1673.0XXHighEnd: 2.10. Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN/ KS:Phasure NOS1 Out 4.0/ #4 Engine/ Adaptive Mode/ Q1=30 Q3=1, Q4=1, Q5=1, xQ1=40/ Dev.Buffer: 4096/ ClockRes: 15ms/ Straight Contiguous/ SFS: 5.19 (max 120)/ Not Invert/ Phase Alignment Off/ Allow format change/ Decode HDCD/ Playerprio: Low/ ThreadPrio: Real Time/ Scheme: Core 3-5/ UnAttended/ Not Switch during Playback Off/ Playback Drive none/ UnAttended/ Include Garbage Collect/ Copy to XX Drive by standard/ Always clear Proxy before Playback/ Stop Desktop Services/ Stop Remaining Services/ Stop All Services: Off/ Keep LAN Services: On - Persist: Off/ Use Remote Desktop/ Minimize OS/ XTweaks : Balanced Load 52/ Nervous Rate 10/ Cool when Idle -/ Provide Stable Power 0/ Utilize Cores always 1/ Time Performance Index: Optimal / Time Stability: Stable / Arc Prediction. Music Server PC (W10) totally silent with OS (W10) in SSD and music inside in SSDs - RDC > Ethernet Gigabyte cable 3m > Audio Pc > 1m USB Lush cable directly from the USB3.0 in the motherboard > PHASURE NOS1a-75B-G3 (Driver v1.0.4) 16ms > Blaxius BNC interconnects > Genelec 1037B 3-Way Active speakers with BNC inputs |
|
|
KnB
Audio Loudspeaker
Offline
Posts: 120
|
|
« Reply #238 on: November 01, 2016, 01:27:54 pm » |
|
Nice And please add my 2nd dac to the list. |
|
|
|
|
Logged
|
Phasure system: XXHighEnd stealth Mack II LPS PC - Clarixia 30cm/Intona USB isolator/Clarixia 1m - NOS1a 75B Dac - Blaxius BNC IC - Orelo mkII
Win 10 14393 - Xeon E5 2050v4 hyperthreading on 24 core - XX 2.06b - min OS - Music on LAN - Adaptive 4096 - Allow format change - Core 3/5, low, Real time - Clock res 0.5 ms - XTweaks 43,100,1,0,1 - Boost at xxhighend startup - SFS 0.12, max 120 SC - Incl garbage - Copy to xx - Always clear proxy - Use remote desktop - Use touch facility - Stop desktop/remaining/wasapi services - Keep LAN - Use remote desktop - OSD text - Show as wallpaper - At attended
Q1,3,4,5,xQ1; 14,1,1,1,10
Custom filter 705600 high
Driver 1.04; USB buffer 16ms
|
|
|
|
AlainGr
|
|
« Reply #239 on: November 01, 2016, 04:01:20 pm » |
|
Thanks everybody !!
I am putting you all on this new list. I think I will merge priorities with the old list. Thus, those on that one too but higher up, will be higher up in this list as well. I think that is fair.
Best regards,
Peter
Ha ha Please don't schedule me to be in 3 years from now |
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,16GB ram 1333Mhz,Win 8 pro 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = 1ms,Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = no,all OSD off,SFS =0.4,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Clearlink USB 2 cable,Phasure NOS1 DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2).
|
|
|
|
