XXHighEnd - The Ultra HighEnd Audio Player
December 05, 2022, 01:52:56 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: August 6, 2017 : Phasure Webshop open ! Go to the Shop
Search current board structure only !!  
   Home   Help Search Login Register  
Pages: 1 2 3 [4] 5 6 7  All
  Print  
Author Topic: Re: Version 0.9y-1 feedback  (Read 65654 times)
0 Members and 0 Guests are viewing this topic.
AUDIODIDAKT
Audio Addict
***
Offline Offline

Posts: 727

There's Nothing So Dated As Yesterdays Future


View Profile Email
« Reply #45 on: August 14, 2009, 04:55:10 am »

Morning,

Running very good, latest version.

1 thing doh,  every album the last track stops at 1 or 2 min before ending. (But could also be last 10 sec)

Roy

* XX-20090814-013042.log (203.06 KB - downloaded 304 times.)
* X3-20090814-025211.log (58.09 KB - downloaded 300 times.)
Logged

(Sept 30, 2010)                                                
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
Eric
Audio Enthusiast
**
Offline Offline

Posts: 248


View Profile
« Reply #46 on: August 14, 2009, 08:51:36 am »

Hi,
when I trie to change volume, the following message is produced:
Change to/from -0dB is not allowed when Engine#3 is running.
Please help.
Eric
Logged

3.2GHz CPU, 8GB RAM, XXHE 1.186a, W7x64 SP1 Ultimate on 2.5" 10Krpm SATAII spinning disk, 8GB RAM / KS:Phasure NOS1 Out 4.0 / #4 Engine / Adaptive / Buffer 4096 / ClockRes 1ms/ Stop All Services / Monitor Off / SFS = 0.4 / not Invert / No XTweaks / Playback Drive = External USB3 (USB powered) HDD / Unattended/ Minimize OS / Peak Ext / ArcPredict / PA- / Q1,-,3,4,5=14,-,0,0,0
Control Panel: Sample Rate: 352.800kHz/ USB Buffer Size: 8ms
Amps: BD-Design bridged Gainclones
Calibrator
Audio Enthusiast
**
Offline Offline

Posts: 556

Certified tweakaholic


View Profile
« Reply #47 on: August 14, 2009, 08:54:50 am »

Lengthy "twitter" ahead ... of value only to Peter I expect.

Thought I would take notes during the day while running 0.9y-1c.

Just to reiterate my pertinent hardware:
ASUS P5Q3 m/board
E8500 CPU (3.16 GHZ OOB ) overclocked to 3.82 GHz on standard voltages.
2 x 2GB sticks Corsair 1333MHz CAS 9 Ram
ESI Juli@ using SPDIF to external processor ( Integra DHC 9.9 ). Driver version 1.05 (32bit)
Gigabyte HD4850 ( 512MB ) video card
VISTA Ultimate - no service packs installed
Primary drive is Seagate 1.5TB, partitioned as follows:
   1 x 30GB Primary ( Primarily for Video playback )
   1 x 30GB Primary ( Spare for future use and testing )
   1 x 30GB Primary ( Music playback - XXHE installed on this and is very spartan )
   1 x 30GB First Logical ( XX Galleries exclusively )
   1 x 1277GB Second logical ( Adhoc Data storage )
Music storage drives consist of 3 x 1.5TG Seagates
Using AHCI for SATA operation

=================================================================================================

Session 1: Ahmad Jamal ~ It's Magic

Unattended
Stop Services, Running Time OSD , OSD Text all ticked
Start Engine3 during conversion , split file at size 100MB
NO covert boxes ticked
Scheme-1 , Nothing , Nothing

As expected, no covertart showed after GUI disappeared. Album played from start to finish and then brought the GUI back again as expected. I noticed a few ( maybe 3 ) brief pauses during play and were well spaced apart.

Closed XXHE down and moved logs to separate folder.

=================================================================================================

Session 2: Acoustic Alchemy ~ The Beautiful Game

Unattended
Stop Services, Running Time OSD , OSD Text all ticked
Start Engine3 during conversion , split file at size 100MB
Show as wallpaper , Show Back , Show mirror Back all ticked
Scheme-1 , Nothing , Nothing

After I pressed PLAY, track 2 in the list onwards were progressively highlighted in blue and just before the end track was highlighted the GUI disappeared and I was presented with the Coverart and album back as it was available.

No sound was forthcoming, and no progress timer. The OSD was not showing either, apart from a slither of the lower text showing just above where the task bar would appear.

I ALT-X'd to bring back the GUI to see what was happening. The progress slider was well advanced into the track. I closed the GUI down again. I noticed the box area where the track timer normally appears ( the red text ) was just a white box. The OSD text was missing completely (ie. the slither of text at the bottom had been cleared). I waited till what I thought should been the end of the track and ALT-X'd again.

The playlist was showing the first track highlighted in blue and the progress bar was at the extreme left.

Clicked on the close button and was jumped back to the coverart.

Alt-X'd again and this time clicked on the stop button.

Closed XXHE down and moved logs to separate folder.

=================================================================================================

Session 3: Acoustic Alchemy ~ The Beautiful Game

Unattended
Stop Services, Running Time OSD , OSD Text all unticked this time <--------------------------
Start Engine3 during conversion , split file at size 100MB
Show as wallpaper , Show Back , Show mirror Back all ticked
Scheme-1 , Nothing , Nothing

After I pressed PLAY, track 2 in the list onwards were progressively highlighted in blue and just before the end track was highlighted the GUI disappeared and I was presented with the Coverart and album back as it was available.

Taskbar showing as expected and no icons showing

Album started playback Happy

Played from start to finish with no apparent pauses ( although the nature of this album makes it a little harder to notice that ). At completion of album the GUI popped up, showing track 1 highlighted in blue as expected.

Before closing XXHE down and starting another session I thought I might now go and tick the STOP SERVICES button and see what happens. The XXDat00**.dao and UnicodeTrack00**.wav files are still present in main XXHE folder at this stage.

Clicked PLAY. The playlist tracks were highlighted much quicker this time as expected, and then the GUI disappeared and I was presented with coverart, and then ...

Album started playback from beginning. No runtime timer as expected and taskbar has disappeared. Played first track fine and went to second smoothly. Will let it continue to completion.

Played to completion and brought GUI back up as expected.

Ticked "Running Time OSD" , then clicked PLAY. <-------------------------------------

GUI disappeared, coverart appeared, runtime appeared, and sound happened ! Will let it run till second track then stop. ( There are just so many times I can listen to the same album over and over again .. haha ). Track 2 kicked off OK ... did ALT-X to bring back GUI.

Clicked STOP. Ticked "OSD Text", highlighted track on in playlist, pressed PLAY <-------------------

GUI disappeared, coverart appeared, runtime appeared, OSD test appeared and sound happened. Will let it run till second track then stop. Track 2 kicked off OK ... did ALT-X to bring back GUI.

Clicked STOP, clicked CLEAR, shut down XXHE and moved logfiles to separate folder.

=================================================================================================

Session 4: Al Stewart ~ Year Of The Cat

Unattended
Scheme-1 , Nothing , Nothing
Show as wallpaper , Show Back , Show mirror Back all ticked
Stop Services, Running Time OSD , OSD Text all ticked
Start Engine3 during conversion , split file at size 100MB

The above is the same as start of session 2.

Clicked PLAY, coverart, OSD text, then running time appeared ( in that order I think .. it wasn't instantaneous for all three components). Sound happened, however I think I detected a very slight pause ( or perhaps a very brief silence ) right at the start of playback. Can't be 100% sure though. First track played fine, went to second track OK. ALT-X'd to bring GUI back up. Clicked STOP. OSD text disappeared as expected. Cleared playlist, shutdown XXHE, and moved logs to separate folder.

Rebooted

=================================================================================================

Session 5: Al Stewart ~ Year Of The Cat

Unattended
Scheme-1 , Nothing , Nothing
Show as wallpaper , Show Back , Show mirror Back all ticked
Stop Services, Running Time OSD , OSD Text all ticked
Start Engine3 during conversion , split file at size 100MB

Same scenario as above ( session 4 ), and I did this time detect a slight  ( missing ) gap at the start of playback. Track 2 started ok, so ALT-X'd to bring GUI back. Clicked STOP. Clicked CLEAR. Moved logs to separate folder.

=================================================================================================

Session 6: Acoustic Alchemy ~ The Beautiful Game

Thought I would try this scenario again as it failed earlier on in similar(ish) circumstances. Perhaps it is the album length ?

Unattended
Stop Services, Running Time OSD , OSD Text all ticked
Start Engine3 during conversion , split file at size 100MB
Show as wallpaper , Show Back , Show mirror Back all ticked
Scheme-1 , Nothing , Nothing

It all worked fine this time .. aaarrgh ! ( I'm also beginning to hate that first track .. hehe ). Will play till second track and see what happens.

Second track kicked off OK , so ALT-X'd to bring GUI back. clicked STOP , then cleared tracks, then shut down XXHE and moved logs to separate folder.

Might try some hi-res albums shortly ... time for lunch first though Happy

=================================================================================================

Session 7 ~ Donald Fagen ~ Morph The Cat @ 24bit/96KHz

Unattended
Stop Services, Running Time OSD , OSD Text all ticked
Start Engine3 during conversion , split file at size 100MB
Show as wallpaper , Show Back , Show mirror Back all ticked
Scheme-1 , Nothing , Nothing

All working fine Happy

Played through till end without any aparent errors.

Cleared playlist and queued up:

David Sanborn ~ Time Again @ 24bit/96Khz

Started playing fine Happy

Played through till end without any aparent errors.

Cleared playlist and queued up:

Grover Washington Jr ~ Winelight @ 24bit/192KHz

Clicked PLAY, it switched to showing coverart of previous album and was immediately replaced by coverart from 'Winelight', the OSD text was showing, BUT NO runtime OSD and NO sound. Let it sit for a minute or so and ALT-X'd to get back to GUI where it showed the progress slider well advanced along. Clicked STOP, shutdown XXHE without clearing playlist and moved logs to separate folder.

=================================================================================================

Session 8:

Started XXHE again, and simply clicked on PLAY. Same scenario as above .. NO sound.

ALT-X'd to get to GUI, progress slider had advanced along, clicked STOP. Closed XXHE, moved logs to separate folder.

=================================================================================================


Time to call it quits for a while. Will continue later today and over the weekend keeping logging running in the background. Hopefully these will be of some assistance in figuring out what's going on.

For my next listening sessions I might try a different PROC scheme. I've been using scheme-1 for months and months now without any issues. Perhaps these new versions warrant a change to scheme-3 to share the load. Is anyone else running scheme-1 WITHOUT any problems with version Y ??

All log files are in separate "sessions' folder in the attached zip file.

Cheers and beers,

Russ



* Log files.zip (135 KB - downloaded 310 times.)
Logged

(Sep 26th 2012) (0.9z-7-4 )
Parameters (0.9z-7-4) ->Coming soon...
Parameters (0.9z-6-1) ->Same as for 0.9z-6
Parameters (0.9z-6) ->http://members.iinet.net.au/~calibrator/XXHE/XXHE_parms_(0.9z-6).jpg
Hardware: Asus P5Q, H2O cooled 3.6GHz C2D, 8GB ram, W7 Ult X64 (NO SP1), O/S plus Galleries on 2x(OCZ 60GB Vertex2) -> ESI Juli@ (v0.978 drivers @ 48 samples) -> coax SPDIF -> Integra DHC-9.9 -> Hafler XL600 -> SGR Audio S-series Octagons -> aural organs -> nucleus accumbens sounds good !

====================
Turntables .. how quaint bored
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16560



View Profile Email
« Reply #48 on: August 14, 2009, 09:04:03 am »

Morning,

Running very good, latest version.

1 thing doh,  every album the last track stops at 1 or 2 min before ending. (But could also be last 10 sec)

Roy

Inspiration

This is something known (to some) and I never could find it 6a skips the last piece of the last song in the playlist). And since so many things have been rewritten in this area, I kind of hoped it was away. So it is not. But :

Somehow suddenly a theoretical bug on this sprung to my mind. And, just checked it, and it is true. I never could mimic this myself so I can't check whether the solution helps, but I'm sure LydMekk can make some arrangements with Diana Krall and check. So, should be solved in the next version (0.9-y1a or 0.9y-2).
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
SeVeReD
Audio Enthusiast
**
Offline Offline

Posts: 599


View Profile WWW Email
« Reply #49 on: August 14, 2009, 09:14:14 am »

Hi,
when I trie to change volume, the following message is produced:
Change to/from -0dB is not allowed when Engine#3 is running.
Please help.
Eric

Hi Eric,
That's normal for XXHE.  For some reason when you've been using the volume you can't go to 0db or you get bad distortion; Peter had to put the warning there and keep it from going to 0db.  I have a xover that has four vol controls, it used to act like a preamp (had to adjust all 4 volume controls ack) so I love having the one vol on XXHE.  I've adjusted my xover so that XXHE vol is normally riding at ~-13.5 ... so far I've never found a recording that had to go all the way to 0db.  If you have a recording/system that needs to ride at 0 db some times, I guess you'd need to stop the song, set vol to 0db, and then hit play.  Hope you can make yours work.
Logged

0.9z-8-3a WAV/CUE files on HDDs via MB FW400>; Win7 pro ttp://www.phasure.com/index.php?topic=352.msg4021#msg4021); [XXHighEnd player  Qs 7, 0, 0, 0, 0; eng 4; adaptive; scheme#3; player priority low; thread priority realtime; clock res 5ms: SFS 420 Wink dac is 24/192 w/32bits; Play Unattended; Stop Services ticked; Wallpaper & Show Back ticked - Mirror Image unticked; Start Engine unticked;garbage collect ticked; copy files to XX-drive; *quad arc prediction upsampling*: straight contiguous:>PCI FW800 card>Fireface 800 DAC [latency 2048 samples for 176.4]; usb/ethernet/mb audio shut off @ MB
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16560



View Profile Email
« Reply #50 on: August 14, 2009, 09:15:01 am »

Hi,
when I trie to change volume, the following message is produced:
Change to/from -0dB is not allowed when Engine#3 is running.
Please help.
Eric

Hi Eric. This is intentional and was needed especially for Russ here, who first spoiled his coffee at waking up and pressing wrong buttons, but next started to spoil cognaq at night time at falling asleep on his remote. That did it.

... or something like that. derisive

More serious, I can't recall quickly why this was solved like this (Russ will know), but I must say that in the mean time it disturbs me myself. So, I will look it up and see whether there's a better solution for whatever it was.

Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16560



View Profile Email
« Reply #51 on: August 14, 2009, 09:19:31 am »

Quote
That's normal for XXHE.  For some reason when you've been using the volume you can't go to 0db or you get bad distortion; Peter had to put the warning there and keep it from going to 0db.

Oh, that's quick (thanks Dave). So, after a bit of cross posting I already know again. So yes, that was the reason. However, this is exactly what (coincidentally) has changed now, since de audio engine plays all from the same source. Thus, earlier there was a difference betwen "not attenuated" and "attenuated", but this difference has vanished. And so, we can just can rid of this quirk now. Will be in the next version.

Russ is good at testing it. whistle
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Eric
Audio Enthusiast
**
Offline Offline

Posts: 248


View Profile
« Reply #52 on: August 14, 2009, 09:48:52 am »

Peter,
Thanks for the morningjoke!
Normally I use my ML32 preamp, so no hurry for me.

Another behaviour in 0.9y-1c strikes me as odd.

After playing a playlist through 0.9x-7, I press Stop, Clear, Off. When I bring up XXHE again, no artwork from the previous session is shown anymore. IMHO this is good behaviour.

When I perform the same sequence in 0.9y-1c, it still shows artwork from the previous session. The way to get a clean screen is to use Delete before Off.
I do not like this change, is it my installation problem (now -for testing purposes- having both 0.9x-7 and 0.9y-1c on my desktop, what about AHK???), or is this change intentional?
Cheers,
Eric.
Logged

3.2GHz CPU, 8GB RAM, XXHE 1.186a, W7x64 SP1 Ultimate on 2.5" 10Krpm SATAII spinning disk, 8GB RAM / KS:Phasure NOS1 Out 4.0 / #4 Engine / Adaptive / Buffer 4096 / ClockRes 1ms/ Stop All Services / Monitor Off / SFS = 0.4 / not Invert / No XTweaks / Playback Drive = External USB3 (USB powered) HDD / Unattended/ Minimize OS / Peak Ext / ArcPredict / PA- / Q1,-,3,4,5=14,-,0,0,0
Control Panel: Sample Rate: 352.800kHz/ USB Buffer Size: 8ms
Amps: BD-Design bridged Gainclones
Calibrator
Audio Enthusiast
**
Offline Offline

Posts: 556

Certified tweakaholic


View Profile
« Reply #53 on: August 14, 2009, 09:50:56 am »

Hi,
when I trie to change volume, the following message is produced:
Change to/from -0dB is not allowed when Engine#3 is running.
Please help.
Eric

Hi Eric. This is intentional and was needed especially for Russ here, who first spoiled his coffee at waking up and pressing wrong buttons, but next started to spoil cognaq at night time at falling asleep on his remote. That did it.


I remember that .. haha

http://www.phasure.com/index.php?topic=787.0

I had to go search for it .. the 'ol memory had forgotten about it.

Russ
Logged

(Sep 26th 2012) (0.9z-7-4 )
Parameters (0.9z-7-4) ->Coming soon...
Parameters (0.9z-6-1) ->Same as for 0.9z-6
Parameters (0.9z-6) ->http://members.iinet.net.au/~calibrator/XXHE/XXHE_parms_(0.9z-6).jpg
Hardware: Asus P5Q, H2O cooled 3.6GHz C2D, 8GB ram, W7 Ult X64 (NO SP1), O/S plus Galleries on 2x(OCZ 60GB Vertex2) -> ESI Juli@ (v0.978 drivers @ 48 samples) -> coax SPDIF -> Integra DHC-9.9 -> Hafler XL600 -> SGR Audio S-series Octagons -> aural organs -> nucleus accumbens sounds good !

====================
Turntables .. how quaint bored
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16560



View Profile Email
« Reply #54 on: August 14, 2009, 11:36:55 am »

Wow Russ, what a work you put into this.

Session 1

As expected, no covertart showed after GUI disappeared. Album played from start to finish and then brought the GUI back again as expected. I noticed a few ( maybe 3 ) brief pauses during play and were well spaced apart.

This is something I know from my own Juli@, and as expected per the Release Notes (at least I recall saying something about this). Btw, I don't blame the Juli@, but I learned it is prone to this. Similar is the heavy conversion, when it ticks abd crackles away. Very good for vinyl simulation, but not much intentional. Anyway ...
Yeah I know, and I must see how to tweak things for the better. Keep in mind that the priority settings play a large role here (you have nothing nothing now). Also, it is exactly this where the OS priority bug (see earlier post in this topic) comes into play. I will try something for the next version (or maybe the one after that).
Notice I have it no different. Maybe 2 oir three times during an album silence of a small second, and it happens during the loading of the next track. But, not with my Firewire connection ... (secret)

Session 2

Quote
No sound was forthcoming, and no progress timer. The OSD was not showing either, apart from a slither of the lower text showing just above where the task bar would appear.


This must -somehow- be the situation I encountered myself at tweaking the code for "Xopy to XX-Drive", and which I reverted. But, this was one part of it only, and I guess there is more that can behave the same.
I will try to play with just your settings and file type, and I guess I can let it happen just the same. The log files show nothing.
In case I can't copy this, how much memory does XXEngine3.exe show in this situation ? It should be a few hundred MB and not a few only (which I saw in my case).

Session 3

Quote
Stop Services, Running Time OSD , OSD Text all unticked this time <--------------------------
Album started playback Happy

So something here must make the difference and the only thing which can really influence the sound producing code, is the Stop Services (not used here). Hmm ... I think I'm getting a hunch here.
With the OSD Time you may have noticed that sometimes the background of it is grabbed from the original desktop wallpaper (at a clean screen) which is something which is difficult to get under my control (this is about timing and the OSD needing to wait until everything has vanished from the screen, that being arranged for the ChangeWP process which really is a stand alone thing. So, this all works with interrupts and possibly things are waiting for eachother because of a situation not thought of (like the OSD background really should be black and which persistently keeps on *not* happening at certain file types).
Sorry for the blahblah, it is merely for myself.

Session 4 / Session 5

Quote
Same scenario as above ( session 4 ), and I did this time detect a slight  ( missing ) gap at the start of playback.

This too is the Juli@ story (above), but of course before this was okay. In this case it will be the Wallpaper showing which creates a too heavy load on the system BUT combined with the priority bug (note that the before story about this is about track load, which is not in order here). So, what somehow happens is that ChangeWP (and its controlling thread) receive a low priority, but the playback threads "inherits" that. So, this doesn't help much. As how it was before, ChangeWP was called from the thread loading the tracks, when things worked out differently. BUT ... as I just realize ... there is a difference between the old and new situation and this is about the necessary tweaking of the Processor Schemes in such a situation. And that does not happen here. Aha ...

Session 6

Quote
Thought I would try this scenario again as it failed earlier on in similar(ish) circumstances. Perhaps it is the album length ?
[...]
Quote
It all worked fine this time .. aaarrgh !

Well, I guess this by now shows what an inmense amount of time it takes to
- coincidentally run into a problem;
- analyse whatever could be the difference, *if* you started recording everything in the first place. Oterwise you're out of luck anyway;
- find the cause;
- solve the problem (like the Copy to XX-Drive didn't work);
- Re-do the whole lot (with the main question "what ?").

Russ, your efforts on this are priceless. I mean it.
I took the two XX log files concerned (the X3 from Session 2 just shows all is okay, but which is up to the track load only -> no more logging is in the code), and found them both the same for relevant data, except for these two parts (which is about the prepapation of the first track) (again, merely for myself registered here) :

Session 2
09:41:00.6260402 : TimeStart : 0
09:41:00.6260402 : Bytes per second : 176400
09:41:00.6260402 : TimeLength : 70775208
09:41:00.6260402 : A
09:41:00.6260402 : B
09:41:00.6260402 : C
09:41:00.6260402 : G
09:41:00.6260402 : M
09:41:00.6260402 : N
09:41:00.6260402 : O
09:41:00.6260402 : P
09:41:00.6260402 : Q
09:41:00.6260402 : V
09:41:00.6260402 : W
09:41:00.6260402 : X
09:41:00.6260402 : Wait for Converson threads to report back
09:41:00.6572402 : Conversion start for processor 1
09:41:00.6572402 : FLAC decoding start for processor 1 Output Name +++++++ "UnicodeTrack0001.wav"
09:41:00.6884402 : X
09:41:00.6884402 : Wait for Converson threads to report back

Session 6
13:08:38.2400347 : TimeStart : 0
13:08:38.2400347 : Bytes per second : 176400
13:08:38.2400347 : TimeLength : 70775208
13:08:38.2400347 : A
13:08:38.2400347 : B
13:08:38.2400347 : C
13:08:38.2400347 : G
13:08:38.2400347 : M
13:08:38.2400347 : Conversion start for processor 1
13:08:38.2400347 : N
13:08:38.2400347 : FLAC decoding start for processor 1 Output Name +++++++ "UnicodeTrack0001.wav"
13:08:38.2400347 : O
13:08:38.2400347 : P
13:08:38.2400347 : Q
13:08:38.2400347 : V
13:08:38.2400347 : W
13:08:38.2400347 : X
13:08:38.2400347 : Wait for Converson threads to report back

Now, the A, B, C (u/i Y) log lines reside in one thread, and everything else is in another.
I didn't look at the real consequences in the program (there shouldn't be), but at least this is the difference. Compared to Session7 / Session 8 (where A-Y show normal), this is'nt doing it.

Session 7

Quote
Clicked PLAY, it switched to showing coverart of previous album and was immediately replaced by coverart from 'Winelight'

Unless it is an OS quirk, this might be of relevance ...

Session 8

Quote
BUT NO runtime OSD and NO sound

Athough this doesn't seem to present additional information, in the end it does because it might be a compareable situation with Session 2 (which is about another album). Besides that, I have that Grover Washington myself.


CONCLUSION

Russ is crazy.


Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16560



View Profile Email
« Reply #55 on: August 14, 2009, 11:44:17 am »

Another behaviour in 0.9y-1c strikes me as odd.

After playing a playlist through 0.9x-7, I press Stop, Clear, Off. When I bring up XXHE again, no artwork from the previous session is shown anymore. IMHO this is good behaviour.

When I perform the same sequence in 0.9y-1c, it still shows artwork from the previous session. The way to get a clean screen is to use Delete before Off.
I do not like this change, is it my installation problem (now -for testing purposes- having both 0.9x-7 and 0.9y-1c on my desktop, what about AHK???), or is this change intentional?

Eric - Thanks. It is very good that you mention this, because I observed similar (hehe) - wasn't sure it always was so, but it disturbs me more and more.
This is (even) merely about not being able to get rid of some tracks if you don't start playback (you can try it). So, since I am now sure this has changed (for no aparent reason), I will try to get it back to normal again.

Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
Calibrator
Audio Enthusiast
**
Offline Offline

Posts: 556

Certified tweakaholic


View Profile
« Reply #56 on: August 14, 2009, 12:26:03 pm »


CONCLUSION

Russ is crazy.


haha .. I've be called that on numerous occassions. I love a good mystery and the hunt to get at the truth.

I try and put myself into your shoes and try and figure out what you need to "see" as you read the logfiles. Trouble shooting from afar must be one of the hardest PC tasks imagineable and one becomes reliant on the party at the other end who has the problem to be your "eyes". It isn't easy and what appears "bleedin' obvious" to you or I sitting in front of our own screen, can lead to feeling of frustration and helplessness when we can't see firsthand what is going on remotely.

I shall endeavour to keep a check on engine3's memory allocation also in future sessions.

While I'm thinking about it, yesterday while trialling a new version ( and I can't be certain which of the 'y' ones it was ), my screen had been powered down due to timeout in my powersaving settings (normally 5 minutes), and when I moved the mouse to wake the screen up, the album I was listening to stopped dead in it's tracks. I have never had that happen before. Needless to say I disabled the screen powerdown mode thereafter. I have had the screensaver disabled all along and had relied on the powerdown function to turn off the monitor. Perhaps a coincidence or yet another example of services interferring with playback.

It's beer o'clock here .... time for a movie for a change Happy

Cheers,

Russ
Logged

(Sep 26th 2012) (0.9z-7-4 )
Parameters (0.9z-7-4) ->Coming soon...
Parameters (0.9z-6-1) ->Same as for 0.9z-6
Parameters (0.9z-6) ->http://members.iinet.net.au/~calibrator/XXHE/XXHE_parms_(0.9z-6).jpg
Hardware: Asus P5Q, H2O cooled 3.6GHz C2D, 8GB ram, W7 Ult X64 (NO SP1), O/S plus Galleries on 2x(OCZ 60GB Vertex2) -> ESI Juli@ (v0.978 drivers @ 48 samples) -> coax SPDIF -> Integra DHC-9.9 -> Hafler XL600 -> SGR Audio S-series Octagons -> aural organs -> nucleus accumbens sounds good !

====================
Turntables .. how quaint bored
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16560



View Profile Email
« Reply #57 on: August 14, 2009, 01:34:15 pm »

I sincerely think that the issue with the screen saver just is a coincidence and will never happen again.

Never say never, and skip James Bond. These days he refuses to tell who he is, and stopped the Martini's as well. Although, I heard someone say that he had one indeed in the last episode, which is hard to tell for me because I usually fall asleep during movies not containing one Aston Martin at least.

Blahblahblah Me.
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
AUDIODIDAKT
Audio Addict
***
Offline Offline

Posts: 727

There's Nothing So Dated As Yesterdays Future


View Profile Email
« Reply #58 on: August 14, 2009, 03:06:10 pm »

My complete Dream Theater collection wont play from within the normal folder.

Outside the folder just playing normal !?
Come back on this

Now PLAYING VERY LOUD Awake - 11 - Space-Dye Vest 


Grtz
Logged

(Sept 30, 2010)                                                
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
AUDIODIDAKT
Audio Addict
***
Offline Offline

Posts: 727

There's Nothing So Dated As Yesterdays Future


View Profile Email
« Reply #59 on: August 14, 2009, 04:10:08 pm »

When playing an album Attented,

all tracks remain in the xx folder (doesn't gets deleted after a track)
So, now i have like 9 unicode tracks in the xx folder, is this normal behavior?

Thinking about it, maybe its better this way, saves time deleting between every song,
and "Prev" would become easier. (Faster I mean)

Right??

But I guess this is about that cover subject.
Logged

(Sept 30, 2010)                                                
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
Pages: 1 2 3 [4] 5 6 7  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Valid XHTML 1.0! Valid CSS!
Page created in 0.077 seconds with 20 queries.