XXHighEnd - The Ultra HighEnd Audio Player
March 29, 2024, 01:17:56 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: August 6, 2017 : Phasure Webshop open ! Go to the Shop
Search current board structure only !!  
   Home   Help Search Login Register  
Pages: 1 [2] 3 4  All
  Print  
Author Topic: Minimized Mode for 09-z7-3  (Read 46905 times)
0 Members and 2 Guests are viewing this topic.
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #15 on: September 15, 2012, 02:05:22 pm »

Hi Ivo,

It is a difference of night and day, really. Well, just try it (also meaning : you really should get it going !).

Regards,
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #16 on: September 15, 2012, 02:31:16 pm »

Peter,

OK.

So, here is what I did so far:

1. Renamed all current XX folders to start with YY.
2. Downloaded z73 rar.
3. Unrared and run XX as usual.
4. Activated, set all settings, tried that it works (audio plays in unattended).
5. Pressed MinOS and let OS reboot.
6. OS came back as normal - I am sure 100% it is such.

Could be so that 'Phasure OCX' should be uninstalled as well before running XX a new?

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
BertD
Audio Enthusiast
**
Offline Offline

Posts: 422


Only the Best!


View Profile WWW Email
« Reply #17 on: September 15, 2012, 05:48:03 pm »

Hi ivo,

Can you still minimize with version 7-2? If so then use that as starting situation where you first take the OS back to normal and use v7-2 to bring windows back to normal duties.

Then create a new directory not using a used name and extract all XX 7-3 files into that directory.

Do NOT activate at first but make XX play with your basic settings first. If that works out okay then make a reboot (to be sure) and start XX v7-3 again. Now you should activate and play some tunes to check if all is still activated. Reboot again bringing all back still working as it should and then going to minimised OS should not be a problem.

Bert
Logged

Februari 1st: RDC controlled i7-4785T (set to 800Mhz - fully passive design without any moving parts), 16GB RAM / XXHighEnd 2.04c on 2GB RAMDisk (IMDisk) / Windows 10 Pro 10586.0 X64 on internal 250GB SSD / Music on external NAS / Playback Drive 10GB RAMDisk (IMDisk) / SFS 0.10 / Barbone Industrial Intona > Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) > Blaxius BNC interlink > BD-Design BD30-SPR amplifiers > BD-Design Custom Made Sigma loudspeakers.

XX settings basically similar to PeterSt's
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #18 on: September 15, 2012, 06:02:46 pm »

Quote
1. Renamed all current XX folders to start with YY.

Consider this a form of "mangling" !

No, that OCX is unrelated.

Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #19 on: September 16, 2012, 12:24:53 am »

Well,

I was able to MinOS easily with last version of 6 just before the 7. I now that before activating version 7 my PC was in normal state because I use it also for other purposes.

Should I now get 7-2, activate it (with refund) and try to MinOS and back?

I will try first to run the latest from 6 and cycle through the
OS states.

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #20 on: September 16, 2012, 01:43:48 am »

So,

Late here.
Tried latest version 6 - it also does not go into MinOS. However, when I reboot button is RED as if I am there. Services are all up and so do the processes. I suppose it is not MinOS.
Then I tried z73 anew and this time no MinOS and no RED button.

BTW, how to say which mode you are besides button? If I look @Taskmanager - is that sufficient?

I am starting to get lost a bit how this all works - normal, unattedned and then MinOS. I had no problem with versions before 7. Is it so that MinOS now works differently in version 7?

I have a fresh PC - 10 days old. Win7 Pro x64 SP1.

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #21 on: September 16, 2012, 06:54:40 am »

Hi Ivo,

Minimized OS and Restore Points W7

Did you read this one ?
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #22 on: September 17, 2012, 09:41:41 pm »

Hello,

Yes, I read that. Tried the reboots, but still cannot get into MinOS mode. Seems that I need to try the restore point.

I see I have them many and I guess right thing to do is try one before the "Installed Phasure OCX".

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #23 on: September 18, 2012, 10:10:53 am »

Morning,

Tried restore point last night. After apply, I needed to re-install OCX addon by XX as well as HiFace drivers (my DAC is based on HiFace).
After all, unsuccessfullu tried to enter the MinOS mode.

Now, would a clean re-install help? I am actually not really getting what is so different in my PC that XX cannot get into MinOS? As I said, I installed it myself fresh, all HW drivers I put myself, there is nothing pre-installed by someone. Also, I disabled various services based on my experience and system is stable - all works. I also did some other system tweeks based on experience (turn off USB power management, stop all types of indexing, etc...)
I do not get what could impact ability of XX to enter MinOS?

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #24 on: September 18, 2012, 11:52:57 am »

Hi Ivo,

I don't think your Activation worked properly. Also, I don't think it *can* work properly when you in the mean time reverted to a Restore Point and because of that reason XXHighEnd needed to be reinstalled (which is just my conclusion from that OCX being vanished). Lastly, you applied a Restore Point which was too old; otherwise that OCX would not have been gone.

So, all my own conclusions, but I think they are correct. But in the mean time I wonder how it can happen that you think Activation is OK while all leads to it being not OK at all (you other topic about Unattended also is an indication).

I don't think a fresh OS install is needed, but it depends a bit on how the "mess" currently is. I think it will be more easy for you to again obtain a Code through Paypal and have a last attempt before indeed doing that fresh OS install. But please follow the procedure (see email) 100% (and I am not saying that you did not before !).

In the mean time ... when the new Code does not help you, you can provide the XX log file which emerges from a Reboot into Minimized attempt. Maybe I can see something in there.
You can do that right now too, but then I must try to incorporate the possibility of not being Activated correctly (which makes it harder *if* I can see from the log file in the first place).

Regards,
Peter
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #25 on: September 19, 2012, 09:13:08 am »

Peter,

As I just wrote on the other topic, re-activation with new code solved problem with sudden stops while in un-attended.

It also solved the going into MinOS and it seems that first time I was doing something not exactly according to procedure, sorry for that.

BUT, this morning, I tried to MinOS again and it again does not go into that ! ! ! Now I pay attention to the title bar - it is in RED - it means activation is OK. I tried several times, but PC reboots normally, however MinOS button is RED. I press it again, it reboots back to 'normal' and MinOS button is BLUE. If I press it and reboot to MinOS, actual OS is normal, but MinOS button is RED. It seems that button says it is there, but OS is not.

I was so happy last night, but this morning unhappy

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #26 on: September 19, 2012, 09:35:56 am »

Forgot to add:

Since last night, PC was in MinOS mode (the only time it worked) and this morning my wife instead of pressing MinOS to bring PC back to normal, just rebooted the PC.

Might it somehow impact this?
Is it really important to always press MinOS button to get back to normal? Or simple restart also is OK?

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
Gerard
Audio Addict
***
Offline Offline

Posts: 1077


WWG1WGA


View Profile
« Reply #27 on: September 19, 2012, 09:58:40 am »

Forgot to add:

Since last night, PC was in MinOS mode (the only time it worked) and this morning my wife instead of pressing MinOS to bring PC back to normal, just rebooted the PC.

Might it somehow impact this?
Is it really important to always press MinOS button to get back to normal? Or simple restart also is OK?

Ivo

Ivo,

I can do it once also. Use the resore point to make it work again. Once it is in minOS i tried not to touch it anymore.

So after you have entered the code and make your setting but before you go in minOS you must have made that restore point.

 Happy
Logged

Januari 2017 XX 2.05
OriginAE x11v Home build HTCP ~ Asus x79 mobo 3930K 12 core underclock 500 MHz,
16GB, *Windows 10 Pro 64 bit build 14393.0* *from RAM*, music on music server / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *0.10*  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core *3-5* / Not Switch Processors during Playback = Off/ Playback Drive *none* (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Not the best (OS from RAM issue) / Time Stability = Off (OS from RAM issue) / Custom Filter Mid 705600 / -> USB3 (Silverstone both sides isolated = Sw#3 of NOS1a = Up) -> *Clairixa USB 15cm* -> Intona Isolator -> Clairixa USB 0.70m -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink ->> Metrum Amps ->> Metrum Acoustics ESL Open Baffle.
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16827



View Profile Email
« Reply #28 on: September 19, 2012, 10:20:15 am »

Ehm Ivo, a sort of unrelated question : did you now make a Restore Point *after* all was working properly ?

Just a question which doesn't need an answer. But it implies how you should deal with Restore Points (and how easily you can get it all going again when something is wrong).

Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
ivo
Audio Enthusiast
**
Offline Offline

Posts: 246


Music lover


View Profile WWW
« Reply #29 on: September 19, 2012, 10:28:20 am »

Hi,

Well, I did not create any restore points after I was able to go into MinOS. My fault this time.

But, with version before z7.. all was fine. I mean I could reboot at any time and MinOS always worked as clock! I never used any restore points before ever. Why is z7 so sensitive to this? Is that somehow related to the new activation mechanism?

Actually, Peter, I did not know there are things like Play1.txt and Play2.txt. I mean I was pressed to read them before I could activate Happy

OK, now, does it mean I need to remove XX from PC, install it a new and get another code and activate it again
OR
I can use any existing restore point I have and then re-install and re-activate?

Ivo
Logged

Music on internal HDD in FLAC-->LatestXX in QAP + PeakExt Mode[KS,Adaptive,2048,Q1=14,xQ1=1,Sch3,Low,Realtime,15 ms, SFS 2-400, Straight, stop all, MinOS]-->Windows 7 Pro SP1 x64bit-->Intel i5 based laptop [8 GB RAM]-->JKDAC32(HiFace based USB-I2S-DAC)-->Denon PMA-1500AE-->JBL E90 3-way speakers
Pages: 1 [2] 3 4  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Valid XHTML 1.0! Valid CSS!
Page created in 0.085 seconds with 20 queries.